2149 - CNC & Conventional Modern Woodworking Manufacturing Plant Previously used by VC Industries in the Manufacture of Panel Products for the Furniture and Allied Industries
Artikelbeschreibung
Seitenaufrufe
Viewing by Appointment only with the Auctioneer, please contact our Office on: +44 (0) 121 328 2424
Auktion endet am
Dienstag 18 Dez 2012 at 03:00 PM GMT
Käuferprovision
Es gilt ein Aufgeld von 15.00%.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00%.
Datum der letzten Zahlung
Donnerstag 20 Dez 2012 at 05:00 PM GMT
Endgültiges Freigabedatum
Freitag 18 Jan 2013 at 05:00 PM GMT
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Please Note: The majority of these items are located in Leeds with the exception of lotS 21A & 21b which are located in Birmingham
Please Note: Lots 35 & 36, Sold as is for Spares.
The dust extraction ducting (if attached) must be disconnected at the machine. No ducting is included in any lots.
Sie müssen sich einloggen, um bieten zu können
Auktion endet am
Dienstag 18 Dez 2012 at 03:00 PM GMT
Käuferprovision
Es gilt ein Aufgeld von 15.00%.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00%.
Datum der letzten Zahlung
Donnerstag 20 Dez 2012 at 05:00 PM GMT
Endgültiges Freigabedatum
Freitag 18 Jan 2013 at 05:00 PM GMT
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 / 38
Lot 1: Holzma Type Optimat Angular Panel Saw Plant
Holzma Type Optimat HKLII/43/22/L/X CNC Angular Panel Saw Plant. S/No. 0241023031 (2007)
Comprising:
Twin Level 3m x 4m approx. Sheet loading Roller Conveyor
3m x 4m approx. Elevating sheet loading Roller Conveyor, 70kN Capacity
Air Operated Sheet Feeder and Roller Tables
Panel Saw approx. 4.3m Bed.
Outfeed Roller Tables, 90 degree feed Roller Tables, Air Operated Sheet Feeder
Panel Saw approx. 4.3m Bed
(4) 2.8m x 600m approx. Air Roller Ball Outfeed Tables
Holzma Power Control
CCTV Process Monitoring
Offcut Conveyor Feed to Fransson Shredder Type TNM 35. S/No. 2584
Please Note: This Item is located in Leeds
Woodworking
Lot 2: Selco Model WNT 600 Rear Loading Panel Beam Saw
Selco Model WNT 600 Rear Loading Panel Beam Saw, approx. 4.4m table S/No. 80395 (1998)
With:- Powered Roller Infeed Conveyor, approx. 4.2m x 1.9m
Elevating Roller Infeed Conveyor, approx. 4.2m x 1.9m
7 Air Roller Ball Outfeed Tables. 2.1m x 600cm
Please Note: This Item is located in Leeds
Engineering
Lot 3: IMA Wehrmann Type Combima K/II/R75/760/F/R3 Double Sided Edge Banding Machine
IMA Wehrmann Type Combima K/II/R75/760/F/R3 Double Sided Edge Banding Machine S/No. 13317 (2000)
Imatronic 100 Control Min width circa 240mm, Max width circa 2535mm.
Believed to contain:
Milling Blocks
Top and Bottom Hogging Units
Front and Back End Milling
Sets of 3 Multi Milling Units
Flat Scraping
Buffing Units
Twin Edge Banding Feed Units and hot melt Glue Systems
Please Note: This Item is located in Leeds
Engineering
Lot 4: IMA (Pentas) Type Combima PC/II/1175/V Double Sided Edge Banding Machine
IMA (Pentas) Type Combima PC/II/1175/V Double Sided Edge Banding Machine. S/No. 245201 (2000)
Pentas Micromat Control, Min width circa 294mm, Max width circa 2600mm
Believed to contain:
Milling Blocks
Hot Melt Glue Systems
Front and Back End Trimmers
Chamfer
4 Contour Trimmers
2 Groovers
Profile and Flat Scraping
Top and Bottom Buffers
Mobile Edgebanding Dispenser
Please Note: This Item is located in Leeds
Engineering
Lot 5: IMA Wehrmann Type Combima Double Sided Edge Banding Machine
IMA Wehrmann Type Combima Double Sided Edge Banding Machine. S/No. RB27223. (1998)
Micromat Controls, Min width circa 240mm, Max width circa 2515 mm
Believed to contain:
Milling Blocks
Hot Melt Glue Systems
Front and Back End Trimmers
Fine Milling
Grooving
Top and Bottom Scrape
Sanding
Please Note: This Item is located in Leeds
Lot 6: IMA Wehrmann Type RB Double Sided Edge Banding Machine
IMA Wehrmann Type RB Double Sided Edge Banding Machine. S/No. RB27733 (09-1996)
Micromat Control, Min width circa 270mm, Max width circa 2530mm
Believed to contain:
Hot Melt Glue Systems
Spindle Moulding
End Trimming
Pre Milling
Profile Scraping
Top and Bottom Buffing
Please Note: This Item is located in Leeds
Lot 7: IMA Wehrmann Type AVM/K/541/S5R3 Single Sided Edge Banding Machine
IMA Wehrmann Type AVM/K/541/S5R3 Single Sided Edge Banding Machine. S/No. RB28250 (01-1998)
Micromat Control Min width circa 175mm Max width circa 667mm
Believed to contain:
(2) Milling Blocks
Hot Melt Glue System
Front and Rear End Trimming
Fine Trimming
Grooving
Scraper
Buffing
Please Note: This Item is located in Leeds
Lot 8: SCM Casadei Type ALA 23 Single Sided Edge Banding Machine
SCM Casadei Type ALA 23 Single Sided Edge Banding Machine with SCM Controls S/No. AH114727 (2010)
Believed to contain:
Hot Melt Glue System
First Machining
Second Machining
Trim/Vertical Copy
Horizontal Copy
Please Note: This Item is located in Leeds
Lot 9: Weeke Type Optimat BHC Venture 1 CNC Machining Centre
Weeke Type Optimat BHC Venture 1 CNC Machining Centre. S/No. 0250111418 (2007)
3 axis
4-Position Automatic Tool Changer
6 Work Supports, circa 3.6m x 1m
Please Note: This Item is located in Leeds
Lot 10: Biesse Model Skipper 100 CNC Machining Centre
Biesse Model Skipper 100 CNC Machining Centre with Rubber Belted Infeed System, 2.3m x 2m, Air Roller Outfeed Table 1.8m x 560mm. S/No. 65371 (2006)
Please Note: This Item is located in Leeds
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.