2414 – CNC & Conventional Equipment no longer required due to Restructuring at H.Mullins (Earby) Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location:- These Items are located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our
Italian Office on + 39 0732 677 063 or email info@cottandco.it
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 80
Lot 1: Daewoo Puma 400B CNC Lathe with Fanuc 21i TB Control
Daewoo Puma 400B CNC Lathe with Fanuc 21i TB Control, 380mm
Hydraulic 3-Jaw Chuck, 115mm Spindle Bore, 10-Station Turret,
Tooleye, Tailstock and Swarf Conveyor. S/No. PM 352512 (2006)
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the purchaser.
Lot 2: Doosan Lynx 300m CNC Lathe with Fanuc i Control
Doosan Lynx 300m CNC Lathe with Fanuc i Control, 254mm Hydraulic
3-Jaw Chuck, 12-Station Turret, Tooleye, Tailstock, Parts Catcher,
LNS Swarf Conveyor. S/No. L 300M0062 (2010)
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 2a: Live Tooling for Doosan Lynx 300m
Live Tooling for Doosan Lynx 300m
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination to include Lots 2 & 2a
Doosan Lynx 300m CNC Lathe with Fanuc i Control, 254mm Hydraulic 3-Jaw Chuck, 12-Station Turret, Tooleye, Tailstock, Parts Catcher, LNS Swarf Conveyor. S/No. L 300M0062 (2010)
and
Live Tooling for Doosan Lynx 300m
Please Note: These Items are located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
2 | Doosan Lynx 300m CNC Lathe with Fanuc i Control |
2a | Live Tooling for Doosan Lynx 300m |
Lot 3: Kronos 208 CNC Lathe
Kronos 208 CNC Lathe with Siemens Sinumeric Control, 254mm
Hydraulic 3-Jaw Chuck, 12-Station Turret, Driven Tools, Tailstock.
S/No. 12164 (1995)
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 3a: VD1 40 Tooling
VD1 40 Tooling
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 3b: 12’’ Manual 4-Jaw Chuck
12’’ Manual 4-Jaw Chuck
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination to include Lots 3, 3a and 3b
Kronos 208 CNC Lathe with Siemens Sinumeric Control, 254mm Hydraulic 3-Jaw Chuck, 12-Station Turret, Driven Tools, Tailstock. S/No. 12164 (1995)
and
VD1 40 Tooling
and
12’’ Manual 4-Jaw Chuck
Please Note: These Items are located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
3 | Kronos 208 CNC Lathe |
3a | VD1 40 Tooling |
3b | 12’’ Manual 4-Jaw Chuck |
Lot 4: CMZ TBi-520 MC CNC Lathe with Fanuc 32i Model A Control
CMZ TBi-520 MC CNC Lathe with Fanuc 32i Model A Control, 300mm
Hydraulic Chuck, 12-Station Turret, Driven Tools, Tooleye,
Tailstock, Swarf Conveyor. S/No. 807 (2008)
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 4a: Algra VD1 50 Live Tooling for TBi-520MC Machine
Algra VD1 50 Live Tooling for TBI-520MC Machine
Please Note: This Item is located in Newcastle upon Tyne,
Unfortunately there are no loading facilities available.
Dismantling and Loading will be at the cost of the
purchaser.