2414 – CNC & Conventional Equipment no longer required due to Restructuring at H.Mullins (Earby) Ltd

Engineering

L'enchère s'est terminée le

2015-09-10 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location:- These Items are located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser.

Prime d'acheteur

'La prime d''acheteur sera fixée à 16.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'

Temps de consultation

Viewing is available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.
Documentation TVA

Veuillez cocher la case ci-dessous et cliquer sur confirmer

* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2015-09-14 17:00:00.0

'Date limite d''apurement'

2015-09-24 17:00:00.0

'Agents d''expédition'

'Liste des agents d''expédition'

Sous-traitants pour le stockage

Liste des sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Exporter/Importer des détails du Royaume-Uni

Informations importantes

Lots 21-30 de 80

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
10 sept. 2015 15:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 8: Takamaz Mini Turn CNC Lathe

Takamaz Mini Turn CNC Lathe with Takamaz Fanuc Control, Collet Chuck, Barfeed (Feedmaster), Plattern Slide. S/No. 46854

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 15:20:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 9: Ajax Victor TNS1 CNC Lathe with Fanuc Control

Ajax Victor TNS1 CNC Lathe with Fanuc Control, 254mm 3-Jaw Hydraulic Chuck, 10-Station Turret, Tailstock, Swarf Conveyor.
S/No. NF – 0156

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 15:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 10: Cincinnati Falcon 200 CNC Lathe with Acramatic 2100 Control

Cincinnati Falcon 200 CNC Lathe with Acramatic 2100 Control, 254mm 3-Jaw Hydraulic Chuck, 12-Station Turret, Tailstock, Swarf Conveyor. S/No. F279603626 (1996)

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 16:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 11: Takang TNC 20N CNC Lathe

Takang TNC 20N CNC Lathe with Fanuc OT Control, 50mm Collet Chuck, 8-Station Turret, Hydrafeed Barfeed, Tailstock, Swarf Conveyor. S/No. F279603626 (1996)

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 15:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 11A: Qty Crawford Collets

Qty Crawford Collets

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 16:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 12: Cincom Citizen G16 Sliding Head CNC Lathe

Cincom Citizen G16 Sliding Head CNC Lathe with Fanuc System 2T Control and Barfeed

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 16:40:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 13: Star RNC 16 Sliding Head CNC Lathe with Fanuc OT Control

Star RNC 16 Sliding Head CNC Lathe with Fanuc OT Control, Collet Chuck, Barfeed, 5 Overhead Slides, 3 Drill Stations, Partcatcher. S/No. S211 870 330

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 16:30:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 14: Correa CF 22/25 Machining Centre with Heidenhain Control

Correa CF 22/25 Machining Centre with Heidenhain Control, 30-Position ATC, 50 INT Taper, 2300mm x 700mm Table Size, Power Index Universal Head, Nikken CNC 500V 4th Axis Indexer, 20’’ Dia Face Plate & 16’’ 3-Jaw Chuck Fitted Indexer Bore 5’’.
S/No. 967424 (2002)

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 17:00:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 15: Correa CF 20/20 Machining Centre with Heidenhain TNC 407 Control

Correa CF 20/20 Machining Centre with Heidenhain TNC 407 Control, Table 1800mm x 700mm, Manual Index Universal Head, 50 INT Taper. S/No. 9690802 (1995)

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Preview image
Fin:
10 sept. 2015 16:10:00 BST
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
20.00%

Lot 16: Deckel Maho DMU70 Machining Centre with Heidenhain TNC 530 Control

Deckel Maho DMU70 Machining Centre with Heidenhain TNC 530 Control, 800mm x 620mm Table, 20-Position ATC, CAT40 Taper, 5 Axis, Heidenhain Measuring Probe. S/No. 15435715814 (2008)

Please Note: This Item is located in Newcastle upon Tyne, Unfortunately there are no loading facilities available. Dismantling and Loading will be at the cost of the purchaser. 

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories