Przedmiot 10: Eumac MC-1300P Vertical Machining Centre
Kończy się:
wtorek 12 gru 2017 16:50 PM GMT
Pozostały czas:
Aukcja zakończona
Musisz się zalogować, aby móc licytować
Podbicie: SEK 1,000
Oferty: 11
Premia kupującego: 18%
Stawka VAT: 25%
| Make: | Eumac |
|---|
Pełny opis działki
Eumac MC-1300P Vertical Machining Centre with Siemens Sinumerik
Control, Table size 1.5m x 700mm, CAT40 Tooling, 30 Station ATC,
Qty Tooling, Swarf Conveyor. S/No. E3087 (7/1996)
Please Note: This lot is located in Saffle,
Sweden. Unfortunately, there are no loading facilities
available on site. Dismantling & Loading will be at the cost of
the purchaser.
Kluczowe warunki / informacje eksportowe
Please Note: These Items are located in Saffle, Sweden. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
The currency will be Swedish Krona.
Clearance Dates - Due to the Christmas break the removal dates for these items will be as follows:
Up until Tuesday 19th December 2017
and then from:
Wednesday 3rd January 2018
(There will be no clearance on site between 20th December 2017 and 2nd January 2018 Inclusive)
Uwaga: ten przedmiot jest również dostępny jako kombinacja
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć
kliknij tutaj
| Partia # | Opis | Aktualna oferta |
|---|---|---|
| * | Combination of Lots 10 & 10A | SEK 35,000 |
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.