2717 - CNC Machining Centres, Wire EDMs, Engineering Equipment previously used by Boxall & Edmiston in the Manufacture of Bespoke Shotguns
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Location: These Lots are located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 16.00%.
VAT
Stawka VAT wynosi 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 21-30 z 61
Przedmiot 9: Semco Model LC-186VS CNC Turret Milling Machine
Semco Model LC-186VS CNC Turret Milling Machine with Anilam 3000m 3 Axis Control, 250mm x 1270mm Table Size, Powered Draw Bar. S/No. 85041498
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 10: Gate PBM-1000 Turret Milling Machine
Gate PBM-1000 Turret Milling Machine with Newall DP700 3 Axis DRO with 1.07m x 230mm Table Size, 60-4200rpm Spindle Speed, Powerfeed to X Axis. S/No. 201411011 (2014)
Please Note: The vice is not included with this
lot
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 11: Colchester Student 1800 Straight Bed Lathe
Colchester Student 1800 Straight Bed Lathe, 40’’ between Centres, Quick Change Tool Post, Dual Dials, Collet Attachment, 2 & 3 Point Steadies, Anilam Wizard 2 Axis DRO Ainjest Threading Unit. S/No. 4/0003/06041X
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 12: Jones & Shipman 540P Surface Grinder
Jones & Shipman 540P Surface Grinder with Power Rye and Fall, 18’’ x 6’’ Magnetic Chuck, Coolant Unit. S/No. 64643
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 13: Warco WMT 300/2 Multi-Purpose Lathe/Milling Machine
Warco WMT 300/2 Multi-Purpose Lathe/Milling Machine, 5’’ 3-Jaw Chuck, Tailstock approx. 500mm between centres x 90mm Centre Height, Vertical Milling Unit Mounted to Headstock. S/No. 02 11 (2004)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 14: SCR 10C Receiver Mounted Compressor
SCR 10C Receiver Mounted Compressor, 7.5kw. S/No. SA325577 (2015)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 15: Ecoair A7 Receiver Mounted Compressor
Ecoair A7 Receiver Mounted Compressor, 5.5kw. S/No. 2121636 (1999)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 16: Chester Model HV-128 Horizontal/Vertical Bandsaw
Chester Model HV-128 Horizontal/Vertical Bandsaw capacity 150mm diameter, Round Horizontal Mode. S/No. 11040663
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 18: Startrite 14RF Vertical Bandsaw
Startrite 14RF Vertical Bandsaw, 21’’ x 21’’ Tilting Table
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 19: Gate ECL 86OA CNC Lathe
Gate ECL 86OA CNC Lathe with Anilam H200T Control, 200mm 3 Jaw Chuck. S/No. 144090119718 (2009)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.