Strona główna Lista mailingowa Combinations info O nas Skontaktuj się z nami Pomoc

Przedmiot 1A: Qty of Back End Tooling

Kończy się:
czwartek 6 lis 2025 17:30 PM GMT
Pozostały czas:
Aukcja zakończona
Musisz się zalogować, aby móc licytować
Podbicie: £ 500
Oferty: 3
Premia kupującego: 18%
Stawka VAT: 20%

Fife, Scotland

Pełny opis działki

Please Note: Highest Bid will be subject to vendor approval.

 

ER16 Tool Holder x 41, ER40 Tool Holder x 34, Morse Taper Holder x 19, Large Pencil Collet Holder x 16, Small Pencil Collet Holder x 2, 8mm Sidelock Holder x 5, 10mm Sidelock Holder x 3, 12mm Side Lock Holder x 10, 16mm Sidelock Holder 20, 25mm Sidelock Holder x 34, 20mm Sidelock Holder x 57, ER32 Extension x 1, ER25 Extension x 1, Small Tapping Chuck x 22, Large Tapping Chuck x 20, suitable for Mazak Nexus 5000-II Horizontal Machining Centres

 

Please Note: Back Ends Only

 

 

Please Note: Highest Bid will be subject to vendor approval.

Location: These lots are located in Fife, Scotland, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

UK Strategic Export Control Legislation (1st April 2024)
The purchaser shall be responsible for ensuring export compliance in accordance with OEM/UK Strategic Export Controls Legislation of 1st April 2024 for goods purchased at auction. The purchaser shall also be responsible for all associated costs in obtaining measurements/accuracy checks for export classification needed for an export application. An Export License Application Fee of £350 plus VAT shall be applicable for goods requiring an export license application.
https://assets.publishing.service.gov.uk/media/660d281067958c001f365abe/uk-strategic-export-control-list.pdf

 

Location

Fife, Scotland

Opłata eksportowa

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55.00 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Uwaga: ten przedmiot jest również dostępny jako kombinacja
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutaj
Partia # Opis Aktualna oferta
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.