Los 1: Excel Heat Furnace
Zurück zur AuktionArtikelbeschreibung
Excel Heat Furnace with upgraded control system comprises programmable load temperature, air temperature, ICU, Thyristors, 9500 Kg Furnace capacity, Furnace operating temperatures 850 degrees C, Normal operating temperatures 600 – 675 degrees C, Furnace rating 300 Kw, Electrical supply 415 V 3 phase 50 Hz, Control equipment 110 V single phase, Inert gas supply, Furnace usable dimensions, Width 2000 mm Length 2000 mm Height 4300 mm, Cover weight 3000 Kg. Furnace ref no. 20659 original (1999), Upgraded new digital controller and panel in 2013. Furnace and associated equipment calibrated every 3 months.
The furnace installation is controlled with electrically
heated elements and has inert gas atmosphere function operation
when required. The furnace design has the type of control ideally
suited to large mass components in addition to smaller products.
The installation comprises of an electrically heated lift off cover
furnace. This is approx. split horizontally into two halves, the
top or cover and base. plus the necessary control equipment. The
cover has a lifting shackle to enable the shop crane to raise the
cover from the base and transport it to the park position. An
access ladder is provided on the cover to enable the operator to
connect the crane to the covers lifting shackle.The circulation fan
is roof mounted just below the roof lining with the shaft and motor
assembly outside on the roof. Cooling fans are also positioned
outside the cover on the roof. The inert atmosphere purge valve is
outside the furnace cover on the roof.
Please click here for Excel Heat Manual
Please Note: A detailed operating & comprehensive technical specification manual is available upon request
Please Note: This lot is located in Dunfermline, Scotland. Unfortunately, there are no loading facilities available on-site. Dismantling and Loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Informationen exportieren
Der Käufer ist auf seine Kosten für das Abklemmen, Abbauen und Entfernen der gekauften Gegenstände vom Versteigerungsort verantwortlich. Beabsichtigt der Käufer, bei der Auktion erworbene Gegenstände zu exportieren, ist er auf eigene Kosten dafür verantwortlich, die Einhaltung aller britischen Exportbedingungen und den Erhalt aller anwendbaren Ausfuhrlizenzen sicherzustellen
Sonstige Angaben
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.