2826 - New, Ex.Demo & Used CNC, Conventional and Toolroom Machinery surplus to the requirements due to the relocation of Gate Machinery International Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Watford, UK. Please see individual lots for loading charges and information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 111-120 de 191
Lot 116: Epple DS-200 Double Ended Grinder
Epple DS-200 Double Ended Grinder, Grinding Disk Dimensions: 200 x 25 x 32mm, Speed: 2850min, 400V
This is an Ex Demonstration Machine - The recommended list price for this item is £115
Please Note: This Item is located in Watford, UK
Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.
Unfortunately there is no warranty with this machine.
Lot 117: Epple BS-100G Bandsaw
Epple BS-100G Bandsaw, Cutting Ranges: 90° Round: 100mm, 90° Rectangular: 100 x 150mm, 45° Rectangular: 100 x 60mm, Swivel: 45 - 90°, Blade Dimensions: 1470 x 0.65 x 13mm, 230V
This is an Ex Demonstration Machine - The recommended list price for this item is £145
Please Note: This Item is located in Watford, UK
Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.
Unfortunately there is no warranty with this machine.
Lot 118: Epple TBH 24 Bench Drill
Epple TBH 24 Bench Drill
This Item has been repaired due to damage in Transit - sold as
is
This is an Ex Demonstration Machine - The recommended list
price for this item is £875
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet
With the purchase of this machine you would be entitled to 3 months warranty, Parts only.
Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ...
Lot 119: Vertex 150mm K-Type Milling Vice
Vertex 150mm K-Type Milling Vice with Swivel Base
This is a New Item - The recommended list price for this item is £159
Please Note: This Item is located in Watford, UK
Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.
With the purchase of this machine you would be entitled to 12 months warranty, against manufacturing defects.
Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details. ...
Lot 120: Vertex 150mm K-Type Milling Vice
Vertex 150mm K-Type Milling Vice with Swivel Base
This is a New Item - The recommended list price for this item is £159
Please Note: This Item is located in Watford, UK
Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.
With the purchase of this machine you would be entitled to 12 months warranty, against manufacturing defects.
Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details. ...
Lot 121: Vertex 150mm K-Type Milling Vice
Vertex 150mm K-Type Milling Vice with Swivel Base
This is a New Item - The recommended list price for this item is £159
Please Note: This Item is located in Watford, UK
Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.
With the purchase of this machine you would be entitled to 12 months warranty, against manufacturing defects.
Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details. ...
Lot 122: Vertex 150mm K-Type Milling Vice
Vertex 150mm K-Type Milling Vice with Swivel Base
This is a New Item - The recommended list price for this item is £159
Please Note: This Item is located in Watford, UK
Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.
With the purchase of this machine you would be entitled to 12 months warranty, against manufacturing defects.
Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details. ...
Lot 123: Vertex 150mm K-Type Milling Vice
Vertex 150mm K-Type Milling Vice with Swivel Base
This is a New Item - The recommended list price for this item is £159
Please Note: This Item is located in Watford, UK
Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.
With the purchase of this machine you would be entitled to 12 months warranty, against manufacturing defects.
Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details. ...
Lot 124: Vertex 150mm K-Type Milling Vice
Vertex 150mm K-Type Milling Vice with Swivel Base
This is a New Item - The recommended list price for this item is £159
Please Note: This Item is located in Watford, UK
Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.
With the purchase of this machine you would be entitled to 12 months warranty, against manufacturing defects.
Gate Machinery International Ltd reserves the right to cancel the machine warranty or refuse to carry out remedial work if, in their opinion, the fault arises from anything other than ‘ manufacturing defects’ or ‘normal operating conditions’ Please visit www.gatemachinery.com/warranty for further details. ...
Lot 125: Vertex 200mm K-Type Milling Vice
Vertex 200mm K-Type Milling Vice with Swivel Base
This is a New Item - The recommended list price for this item is £279
Please Note: This Item is located in Watford, UK
Manual handling, preparation and loading onto suitable vehicle charge of £15 will be automatically added to your invoice should you be successful in purchasing this item.