2826 - New, Ex.Demo & Used CNC, Conventional and Toolroom Machinery surplus to the requirements due to the relocation of Gate Machinery International Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Watford, UK. Please see individual lots for loading charges and information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 191
Lot 22: Gate Progress PR-2VS Variable Speed Pedestal Drill
Gate Progress PR-2VS Variable Speed Pedestal Drill, 1.2kW DC Motor, Variable Spindle Speed: 160 - 2,000rpm,MT3 Spindle Taper, 120mm Spindle Travel, 500mm Swing, Quill Diameter: 55mm, Column Diameter: 115mm, Table Work Surface: 420 x 470mm, Spindle Nose to Table: 670mm, Spindle Nose to Base: 1225mm, (2) 16 x 26mm T-Slots, Mild Steel Capacities - Tapping: 12mm, Drilling: 28mm
This is New Machine - The recommended list price for this item is £2,325
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base. ...
Lot 24: Gate Progress PR-1VS Variable Speed Bench Drill
Gate Progress PR-1VS Variable Speed Bench Drill
This is New Machine - The recommended list price for this item is £1,650
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.
With the purchase of this machine you would be entitled to 12
months warranty, Parts only.
Gate Machinery International Ltd reserves the right to cancel
the machine warranty or refuse to carry out remedial work if, in
their opinion, the fault arises from anything other than ‘
manufacturing defects’ or ‘normal operating conditions’ ...
Lot 25: Gate Progress PR-1VS Variable Speed Bench Drill
Gate Progress PR-1VS Variable Speed Bench Drill
This is New Machine - The recommended list price for this item is £1,650
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.
With the purchase of this machine you would be entitled to 12
months warranty, Parts only.
Gate Machinery International Ltd reserves the right to cancel
the machine warranty or refuse to carry out remedial work if, in
their opinion, the fault arises from anything other than ‘
manufacturing defects’ or ‘normal operating conditions’ ...
Lot 26: Gate Progress PR-1VS Variable Speed Bench Drill
Gate Progress PR-1VS Variable Speed Bench Drill
This is New Machine - The recommended list price for this item is £1,650
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.
With the purchase of this machine you would be entitled to 12
months warranty, Parts only.
Gate Machinery International Ltd reserves the right to cancel
the machine warranty or refuse to carry out remedial work if, in
their opinion, the fault arises from anything other than ‘
manufacturing defects’ or ‘normal operating conditions’ ...
Lot 27: Gate Progress PR-1VS Variable Speed Bench Drill
Gate Progress PR-1VS Variable Speed Bench Drill
This is New Machine - The recommended list price for this item is £1,650
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.
With the purchase of this machine you would be entitled to 12
months warranty, Parts only.
Gate Machinery International Ltd reserves the right to cancel
the machine warranty or refuse to carry out remedial work if, in
their opinion, the fault arises from anything other than ‘
manufacturing defects’ or ‘normal operating conditions’ ...
Lot 28: Gate Profitdrill PD-2P Pedestal Drill
Gate Profitdrill PD-2P Pedestal Drill, Max. Drilling Capacity: 25mm dia, MT3 Spindle Taper, Spindle Travel: 90mm, Working Diameter: 370mm, Spindle Speeds: 230 - 2,350rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 700mm, Spindle Base: 1250mm, 1HP Motor
This is New Machine - The recommended list price for this item is £1,605
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.
With the purchase of this machine you would be entitled to 12
months warranty, Parts only.
Gate Machinery International ...
Lot 29: Gate Profitdrill PD-2P Pedestal Drill
Gate Profitdrill PD-2P Pedestal Drill, Max. Drilling Capacity: 25mm dia, MT3 Spindle Taper, Spindle Travel: 90mm, Working Diameter: 370mm, Spindle Speeds: 230 - 2,350rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 700mm, Spindle Base: 1250mm, 1HP Motor
This is New Machine - The recommended list price for this item is £1,605
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.
With the purchase of this machine you would be entitled to 12
months warranty, Parts only.
Gate Machinery International ...
Lot 30: Gate Profitdrill PD-2P Pedestal Drill
Gate Profitdrill PD-2P Pedestal Drill, Max. Drilling Capacity: 25mm dia, MT3 Spindle Taper, Spindle Travel: 90mm, Working Diameter: 370mm, Spindle Speeds: 230 - 2,350rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 700mm, Spindle Base: 1250mm, 1HP Motor
This is New Machine - The recommended list price for this item is £1,605
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.
With the purchase of this machine you would be entitled to 12
months warranty, Parts only.
Gate Machinery International ...
Lot 31: Gate Profitdrill PD-1P Pedestal Drill
Gate Profitdrill PD-1P Pedestal Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 720mm, Spindle Base: 1250mm, 1/2 HP Motor
This is New Machine - The recommended list price for this item is £1,445
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.
With the purchase of this machine you would be entitled to 12
months warranty, Parts only.
Gate Machinery ...
Lot 32: Gate Profitdrill PD-1P Pedestal Drill
Gate Profitdrill PD-1P Pedestal Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 720mm, Spindle Base: 1250mm, 1/2 HP Motor
This is New Machine - The recommended list price for this item is £1,445
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded with Fork Lift onto lorry - Machine on base.