2823A - Hurco and Bridgeport Machining Centres, Bridgeport CNC Mills, Toolroom Equipment and Ancillaries no longer required due to Investment in New Equipment by The Goodfish Group, Worcester
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Location: These lots are located in Cannock and Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 16.00%.
VAT
Stawka VAT wynosi 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 11-20 z 92
Przedmiot 202: Bridgeport Series II Interact 4 CNC Mill
Bridgeport Series II Interact 4 CNC Mill with Heidenhain 370 Control, Table Size 960mm x 380mm, 6" Machine Vice, Qty of CAT40 Tool Holders. S/No. 618990895
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 203: Bridgeport Series II Interact 4 CNC Mill
Bridgeport Series II Interact 4 CNC Mill with Heidenhain TNC 2500 Control, Table Size 960mm x 380mm, 6" Machine Vice, Qty of CAT40 Tool Holders. S/No. 618540194
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 203A: Qty of BT40 Tool Holders and Collets
Qty of BT40 Tool Holders and Collets
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of lots 203 & 203A
Bridgeport Series II Interact 4 CNC Mill with Heidenhain TNC 2500 Control, Table Size 960mm x 380mm, 6" Machine Vice, Qty of CAT40 Tool Holders. S/No. 618540194
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
203 | Bridgeport Series II Interact 4 CNC Mill |
203A | Qty of BT40 Tool Holders and Collets |
Przedmiot 204: XYZ SLX Turn 425 x 1.25m Lathe
XYZ SLX Turn 425 x 1.25m Lathe with Proto Trax SLX Control, Gap Bed, 10" 3 Jaw Chuck, 3 Point Steady, 16" Face Plate, Max RPM 2500, Qty of Quick Change Tooling. S/No. 4537 (2012)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 204A: Qty of Quick Change Tooling
Qty of Quick Change Tooling
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of lots 204 & 204A
Combination of lots 204 & 204A XYZ SLX Turn 425 x 1.25m Lathe with Proto Trax SLX Control, Gap Bed, 10" 3 Jaw Chuck, 3 Point Steady, 16" Face Plate, Max RPM 2500, Qty of Quick Change Tooling. S/No. 4537 (2012) and Qty of Quick Change Tooling
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
204 | XYZ SLX Turn 425 x 1.25m Lathe |
204A | Qty of Quick Change Tooling |
Przedmiot 205: ONA DB300 Spark Eroder
ONA DB300 Spark Eroder with ONA Control, 8" Machine Vice, Table Size 650mm x 400mm, Tank Size 900mm x 600mm x 350mm Deep, Qty of System 3R Tooling. S/No. 11432 (2010)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 205A: Qty of System 3R Tooling
Qty of System 3R Tooling
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of Lots 205 & 205A
Combination of Lots 205 & 205A
ONA DB300 Spark Eroder with ONA Control, 8" Machine Vice, Table Size 650mm x 400mm, Tank Size 900mm x 600mm x 350mm Deep, Qty of System 3R Tooling. S/No. 11432 (2010)
and
Qty of System 3R Tooling
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
205 | ONA DB300 Spark Eroder |
205A | Qty of System 3R Tooling |