2823A - Hurco and Bridgeport Machining Centres, Bridgeport CNC Mills, Toolroom Equipment and Ancillaries no longer required due to Investment in New Equipment by The Goodfish Group, Worcester
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Location: These lots are located in Cannock and Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 16.00%.
VAT
Stawka VAT wynosi 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 1-10 z 92
Przedmiot 100: Hurco VMX 30 Vertical Machining Centre
Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 100A: Qty of CAT40 Tool Holders
Qty of CAT40 Tool Holders and Collets and Bench
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of Lots 100 & 100A
Combination of Lots 100 & 100A
Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)
and
Qty of CAT40 Tool Holders, Collets and Bench
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
100 | Hurco VMX 30 Vertical Machining Centre |
100A | Qty of CAT40 Tool Holders |
Przedmiot 101: Hurco VSX24 Vertical Machining Centre
Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 101A: Qty of CAT40 Tool Holders and Collets
Qty of CAT40 Tool Holders and Collets
Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of Lots 101 & 101A
Combination of Lots 101 & 101A
Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)
and
Qty of CAT40 Tool Holders and Collets
Please Note: These lots are located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
101 | Hurco VSX24 Vertical Machining Centre |
101A | Qty of CAT40 Tool Holders and Collets |
Przedmiot 200: Hurco VM1 Machining Centre
Hurco VM1 Machining Centre with Hurco Max Control, 16 ATC, Table Size 760mm x 350mm, 6” Machine Vice, Qty of BT 40 Tooling. S/No. H-V11662 (2006)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmiot 201: Bridgeport VMC 800/22 Digital Machining Centre
Bridgeport VMC 800/22 Digital Machining Centre with Heidenhain 4266 Control, Table size 1000mm x 490mm, 6" Machine Vice, Qty of BT40 Tool Holders. S/No. 721748 (1998)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot 201A: Qty of BT40 Tool Holders & Collets
Qty of BT40 Tool Holders & Collets
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Uwaga: ten przedmiot jest również dostępny jako kombinacja.
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPrzedmiot *: Combination of Lots 201 & 201A
Combination of Lots 201 & 201A
Bridgeport VMC 800/22 Digital Machining Centre, with Heidenhain 4266 Control, Table size 1000mm x 490mm, 6" Machine Vice, Qty of BT40 Tool Holders. S/No. 721748 (1998)
and
Qty of BT40 Tool Holders & Collets
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutajPartia # | Opis |
---|---|
201 | Bridgeport VMC 800/22 Digital Machining Centre |
201A | Qty of BT40 Tool Holders & Collets |