3197 - Large Quantity of Various DIN40/50, BT40/50 & HSK100, DIN/Capto Adaptive Spindle Tool Holders
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 61-70 de 76
Lot 61: (10) x Various DIN40 Heat Shrink Spindle Tool Holders
(10) x Various DIN40 Heat Shrink Spindle Tool Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 62: (10) x Various DIN40 Heat Shrink Spindle Tool Holders
(10) x Various DIN40 Heat Shrink Spindle Tool Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 63: (10) x Various DIN40 Heat Shrink Spindle Tool Holders
(10) x Various DIN40 Heat Shrink Spindle Tool Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 64: (10) x Various DIN40 Heat Shrink Spindle Tool Holders
(10) x Various DIN40 Heat Shrink Spindle Tool Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 65: (10) x Various DIN40 Heat Shrink Spindle Tool Holders
(10) x Various DIN40 Heat Shrink Spindle Tool Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 66: (10) x Various DIN40 Heat Shrink Spindle Tool Holders
(10) x Various DIN40 Heat Shrink Spindle Tool Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 67: (10) x Various DIN40 to Capto C5 Spindle Tool Holders
(10) x Various DIN40 to Capto C5 Spindle Tool Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 68: (10) x Various DIN40 to Capto C5 Spindle Tool Holders
(10) x Various DIN40 to Capto C5 Spindle Tool Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 69: (10) x Various DIN40 to Capto C5 Spindle Tool Holders
(10) x Various DIN40 to Capto C5 Spindle Tool Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 70: (10) x Various DIN40 to Capto C5 Spindle Tool Holders
(10) x Various DIN40 to Capto C5 Spindle Tool Holders
Please Note: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.