3116 - Sheet Metal Machinery & Fabrication Equipment, Welders & Bed Plates Surplus to the on-going requirements of The Pryme Group
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 36
Lot 20: Jasic Tig 500 Pulse Welder Tig 500P AC/DC 500 Amp Torch
Jasic Tig 500 Pulse Welder Tig 500P AC/DC 500 Amp Torch With Remote Handbag Extension Control on Trolley. Country of Origin: China
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms ...
Lot 21: Migatronic P1- 400 Mig Welder AC/DC 400 Amp Wire Feed Torch
Migatronic P1- 400 Mig Welder AC/DC 400 Amp Wire Feed Torch Remote Handbag Extension Control On Trolley. S/No. 25. Country of Origin: China
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued ...
Lot 22: Leason Tube Notcher Model TN800
Leason Tube Notcher Model TN800 Capacity 1” to 3” Diameter with Dial Setting or Set Angle For Outside Diameters Speed 350rpm. S/No.
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued ...
Lot 23: Lorch Saprom 8 Mig Welder 25 – 500 Amp Torch
Lorch Saprom 8 Mig Welder 25 – 500 Amp Torch with Remote Handbag Extension Control on Trolley. S/No. 404 1826 002
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW ...
Lot 24: EWM Tetrix 451 Tig Pulse Welder
EWM Tetrix 451 Tig Pulse Welder AC/DC Tig Pulse AC Frequency Between 30HZ – 300 HZ Torch – Trolley. S/No. 0000331638
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms ...
Lot 25: Various Welders (Mig & Tig) From Nexus, Kemppi, Migatronic & Newarc
Various Welders (Mig & Tig)
(3) x Migatronic, (3) x Nexus, (2) x Newarc, (3) x Kemppi
Please Note: This lot is for Spares & Repairs
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued ...
Lot 27: (2) x Welding Rotators
(2) x Welding Rotators (Sold As Pair Due To Motor Fault) Red Unit Top Plate 920mm (36”) Green Unit 1010mm (44”)
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW ...
Lot 28: (17) x Welding Enclosure Screens
(17) x Welding Enclosure Screens (RED) Each Screen Size 245mm (96”) x 190mm (75”)
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 29: (17) x Welding Enclosure Screens
(17) x Welding Enclosure Screens (Black) Each Screen Size 170mm (68”) x 190mm (75”)
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.
Lot 30: Metal Cabin – Safe Store Workshop Cabin with Double Lock Door
Metal Cabin – Safe Store Workshop Cabin with Double Lock Door (2 Sets Spare Keys Available) Dimensions Approx. L – R 2000mm F – B 2500mm – Please Note: Contents are NOT Included
Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from ...