3116 - Sheet Metal Machinery & Fabrication Equipment, Welders & Bed Plates Surplus to the on-going requirements of The Pryme Group

Engineering

Aukcja zakończyła się dnia

2022-06-07 15:00:00.0

Pozostały czas

Aukcja zakończona

Opis aukcji

Please Note: These lots are located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Premia kupującego

Premia kupującego zostanie naliczona w wysokości 18.00%.

VAT

Stawka VAT wynosi 20.00 %.

Seitenaufrufe

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

Nabywca na własny koszt jest odpowiedzialny za odłączenie, demontaż i usunięcie przedmiotów zakupionych z miejsca aukcji. Jeśli nabywca zamierza wyeksportować przedmioty zakupione na aukcji, jest odpowiedzialny na własny koszt za zapewnienie zgodności ze wszystkimi brytyjskimi warunkami eksportowymi i uzyskanie wszelkich stosownych pozwoleń na wywóz

Zaznacz poniższe pole i naciśnij potwierdź


* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.

Informacja dla kupujących

Ostateczna data płatności

2022-06-09 17:00:00.0

Ostateczna data odbioru przedmiotu

2022-06-23 17:00:00.0

Firmy transportowe

Firmy magazynowe

Eksport/Import z Wielkiej Brytanii szczegóły

Przedmioty 1-10 z 36

Licytacja zostanie przedłużona na poszczególne partie, jeśli oferty zostaną złożone w ciągu 10 minut od czasu zakończenia przedmiotu.
Preview image
Kończy się:
07 cze 2022 15:50:00 BST
Pozostały czas:
Licytacja zakończona
Premia kupującego:
18.00%
Stawka VAT:
20.00%

Przedmiot 10: S F M Twin Roll 48” Long Powered Bending Rolls

S F M Twin Roll 48” Long Powered Bending Rolls

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

 

 

Preview image
Kończy się:
07 cze 2022 15:20:00 BST
Pozostały czas:
Licytacja zakończona
Premia kupującego:
18.00%
Stawka VAT:
20.00%

Przedmiot 11: M G 3 Roll Pyramid Bending Rolls

M G 3 Roll Pyramid Bending Rolls Model MH 314C with Pre-Bend Arrangement, Driven Rolls Top Roll 200mm x 1250mm Lower Rolls 180mm. Country of Origin: Italy

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...

Preview image
Kończy się:
07 cze 2022 16:00:00 BST
Pozostały czas:
Licytacja zakończona
Premia kupującego:
18.00%
Stawka VAT:
20.00%

Przedmiot 12: Edwards Truecut DD Guillotine Shear Model 13 – 3000

Edwards Truecut DD Guillotine Shear Model 13 – 3000 with Power Backgauge and Digital Display, Variable Rake, Blade Gap and Stroke Adjustment, 3 Front Support Arms Left Side Square Arm, Footswitch Control. (Customer Notice Capacity on M/C 10mm M.S 15mm Aluminium) Country of Origin: United Kingdom

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork ...

Preview image
Kończy się:
07 cze 2022 15:20:00 BST
Pozostały czas:
Licytacja zakończona
Premia kupującego:
18.00%
Stawka VAT:
20.00%

Przedmiot 13: Excel Radial Drill Model RD 1100

Excel Radial Drill Model RD 1100 with Box Table and Vice, Spindle Centre to Column 1100mm, Drill Head Travel 800mm, Spindle 4 MT, Speeds 44 – 1500rpm Power Rise and Fall, Spindle Brake, Coolant. S/No. 5209 (2006). Country of Origin: Singapore

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This ...

Preview image
Kończy się:
07 cze 2022 16:00:00 BST
Pozostały czas:
Licytacja zakończona
Premia kupującego:
18.00%
Stawka VAT:
20.00%

Przedmiot 14: Kingsland Universal Metalworker Model 85XS

Kingsland Universal Metalworker Model 85XS – Punch Capacity 85 Ton, Universal Machine with Punch Station – Angle – Section Cutting – Shearing – Notching Punch 55 Dia Thru 12mm 33 Dia Thru 20mm – Shear Flat Bar 380mm x 20mm – Shear Angle 90° 150mm x 15mm 45° 80mm x 10mm Shear Rounds 50mm. S/No. 980898. Country of Origin: United Kingdom

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice ...

Preview image
Kończy się:
07 cze 2022 15:30:00 BST
Pozostały czas:
Licytacja zakończona
Premia kupującego:
18.00%
Stawka VAT:
20.00%

Przedmiot 15: Multimatrix Phoenix EWM Mig/Mag Pulse Welder

Multimatrix Phoenix EWM Mig/Mag Pulse Welder 350 Amp – Torch with Remote Handbag Extension Control on Trolley. S/No. 0000533391. Country of Origin: Germany

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...

Preview image
Kończy się:
07 cze 2022 15:00:00 BST
Pozostały czas:
Licytacja zakończona
Premia kupującego:
18.00%
Stawka VAT:
20.00%

Przedmiot 16: Multimatrix Phoenix EWM Mig/Mag Pulse Welder

Multimatrix Phoenix EWM Mig/Mag Pulse Welder 350 Amp – Torch with Remote Handbag Extension Control on Trolley. S/No. 0000331551. Country of Origin: Germany

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...

Preview image
Kończy się:
07 cze 2022 15:10:00 BST
Pozostały czas:
Licytacja zakończona
Premia kupującego:
18.00%
Stawka VAT:
20.00%

Przedmiot 17: Multimatrix Phoenix EWM Mig/Mag Pulse Welder

Multimatrix Phoenix EWM Mig/Mag Pulse Welder 350 Amp – Torch with Remote Handbag Extension Control on Trolley. S/No. 0000704087. Country of Origin: Germany

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...

Preview image
Kończy się:
07 cze 2022 15:10:00 BST
Pozostały czas:
Licytacja zakończona
Premia kupującego:
18.00%
Stawka VAT:
20.00%

Przedmiot 18: Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch

Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch. S/No. 31630. Country of Origin: United Kingdom

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Preview image
Kończy się:
07 cze 2022 15:10:00 BST
Pozostały czas:
Licytacja zakończona
Premia kupującego:
18.00%
Stawka VAT:
20.00%

Przedmiot 19: Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch

Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch. S/No. 34110. Country of Origin: United Kingdom

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Kategorie