3116 - Sheet Metal Machinery & Fabrication Equipment, Welders & Bed Plates Surplus to the on-going requirements of The Pryme Group

Engineering

L'enchère s'est terminée le

mardi 7 juin 2022 at 03:00PM (BST)

Temps restant

Enchère terminée

'Description de l''enchère'

Please Note: These lots are located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20%.'

Temps de consultation

Viewing will be available by appointment only. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange a mutually convenient time.

L'acheteur sera responsable à ses frais de déconnecter, démonter et retirer les articles achetés du lieu de vente aux enchères. Si l'acheteur a l'intention d'exporter des articles achetés lors de la vente aux enchères, il sera responsable à ses frais de garantir le respect de toutes les conditions d'exportation du Royaume-Uni et l'obtention de toutes les licences d'exportation applicables.

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

9 juin 2022 at 17:00 (BST)

'Date limite d''apurement'

23 juin 2022 at 17:00 (BST)

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 1-10 de 36

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
07 juin 2022 15:50:00 BST
Temps restant:
Enchère terminée
Augmentation:
£10
Enchères:
36
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 10: S F M Twin Roll 48” Long Powered Bending Rolls

S F M Twin Roll 48” Long Powered Bending Rolls

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

 

 

Preview image
Fin:
07 juin 2022 15:20:00 BST
Temps restant:
Enchère terminée
Augmentation:
£50
Enchères:
22
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 11: M G 3 Roll Pyramid Bending Rolls

M G 3 Roll Pyramid Bending Rolls Model MH 314C with Pre-Bend Arrangement, Driven Rolls Top Roll 200mm x 1250mm Lower Rolls 180mm. Country of Origin: Italy

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...

Preview image
Fin:
07 juin 2022 16:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£100
Enchères:
25
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 12: Edwards Truecut DD Guillotine Shear Model 13 – 3000

Edwards Truecut DD Guillotine Shear Model 13 – 3000 with Power Backgauge and Digital Display, Variable Rake, Blade Gap and Stroke Adjustment, 3 Front Support Arms Left Side Square Arm, Footswitch Control. (Customer Notice Capacity on M/C 10mm M.S 15mm Aluminium) Country of Origin: United Kingdom

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork ...

Preview image
Fin:
07 juin 2022 15:20:00 BST
Temps restant:
Enchère terminée
Augmentation:
£50
Enchères:
11
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 13: Excel Radial Drill Model RD 1100

Excel Radial Drill Model RD 1100 with Box Table and Vice, Spindle Centre to Column 1100mm, Drill Head Travel 800mm, Spindle 4 MT, Speeds 44 – 1500rpm Power Rise and Fall, Spindle Brake, Coolant. S/No. 5209 (2006). Country of Origin: Singapore

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This ...

Preview image
Fin:
07 juin 2022 16:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£50
Enchères:
58
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 14: Kingsland Universal Metalworker Model 85XS

Kingsland Universal Metalworker Model 85XS – Punch Capacity 85 Ton, Universal Machine with Punch Station – Angle – Section Cutting – Shearing – Notching Punch 55 Dia Thru 12mm 33 Dia Thru 20mm – Shear Flat Bar 380mm x 20mm – Shear Angle 90° 150mm x 15mm 45° 80mm x 10mm Shear Rounds 50mm. S/No. 980898. Country of Origin: United Kingdom

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice ...

Preview image
Fin:
07 juin 2022 15:30:00 BST
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
49
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 15: Multimatrix Phoenix EWM Mig/Mag Pulse Welder

Multimatrix Phoenix EWM Mig/Mag Pulse Welder 350 Amp – Torch with Remote Handbag Extension Control on Trolley. S/No. 0000533391. Country of Origin: Germany

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...

Preview image
Fin:
07 juin 2022 15:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
27
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 16: Multimatrix Phoenix EWM Mig/Mag Pulse Welder

Multimatrix Phoenix EWM Mig/Mag Pulse Welder 350 Amp – Torch with Remote Handbag Extension Control on Trolley. S/No. 0000331551. Country of Origin: Germany

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...

Preview image
Fin:
07 juin 2022 15:10:00 BST
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
36
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 17: Multimatrix Phoenix EWM Mig/Mag Pulse Welder

Multimatrix Phoenix EWM Mig/Mag Pulse Welder 350 Amp – Torch with Remote Handbag Extension Control on Trolley. S/No. 0000704087. Country of Origin: Germany

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices ...

Preview image
Fin:
07 juin 2022 15:10:00 BST
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
14
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 18: Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch

Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch. S/No. 31630. Country of Origin: United Kingdom

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Preview image
Fin:
07 juin 2022 15:10:00 BST
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
15
'Prime d''acheteur:'
18%
Taux de TVA:
20%

Lot 19: Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch

Nexus NXM 405 Mig Welder 405 Amp Wire Feed Torch. S/No. 34110. Country of Origin: United Kingdom

Please Note: This lot is located in Newcastle, UK. Unfortunately, there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories