2821 - CNC Machining Centres & Lathes, Butler Elgamill, Borers, Milling Machines, Grinders and Toolroom Equipment previously used by Cyrus Engineering
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Wales.
Lots 2, 8 & 13 are located in Glamorgan all other lots are located in Swansea. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 95
Lot 11: Tarnow TUJ 50M63 Gap Bed Centre Lathe
Tarnow TUJ 50M63 Gap Bed Centre Lathe with Acu-Rite 2-Axis Digital Read Out, 610mm x 2.7m Bed, 3m Distance between centres, 400mm 3-Jaw Chuck, 400mm 4-Jaw Chuck, 3-Point Steady. S/No. 506 (1998)
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 12: Tarnow Centre Lathe
Tarnow Centre Lathe with Acu-Rite 2-Axis Digital Read Out, 400mm 3-Jaw Chuck, 500mm 4-Jaw Chuck, 350mm 3 Jaw Chuck, 380mm 3 Jaw Chuck, 400mm 4 Jaw Chuck, 500mm 4 Jaw Chuck, 4m Distance between centres, Quick Change Tooling, 2 Point Steady and 3 Point Steady. S/No. not available (1992)
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 13: Colchester Mastiff 1400 Lathe
Colchester Mastiff 1400 Lathe, 12" 3 Jaw Chuck, distance between Centres 5ft, Gap Bed, 16" 4 Jaw chuck, 3 Point Steady, Quick Change Tooling. S/No. 8/0205/05372
Please Note: This lot is located in Glamorgan, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 14: Fil Aurora Model FA150 Bed Type Horizontal & Vertical Milling & Boring Machine
Fil Aurora Model FA150 Bed Type Horizontal & Vertical Travelling Table Milling & Boring Machine with Newall B60 Digital Read Out, Table Size 2.5m x 530mm
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 15: Huron MU2006 Milling Machine
Huron MU2006 Milling Machine with Heidenhain TNC 131 Control, Table Size 2m x 460mm, (2) x 8" Machine Vices. S/No. 85633 (1981)
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 16: Huron M66 355 Milling Machine
Huron M66-355 Milling Machine with Heidenhain Control, Table Size 2m x 700mm. S/No. 13576 (1989)
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 17: Huron Milling Machine
Huron Milling Machine, Table Size 1.6m x 700mm, (2) x 8'' Machine Vices
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 18: Butler Vertical Slotter
Butler Vertical Slotter, 30" dia Table
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 19: Huron NU5 Milling Machine
Huron NU5 Milling Machine with Acu-rite Digital Read Out, Table Size 1.6 x 460mm, (2) x 8'' Machine Vices. S/No. 15108 (1977)
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 20: Ormerod Vertical Slotter
Ormerod Vertical Slotter, 24" dia Table
Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.