2821 - CNC Machining Centres & Lathes, Butler Elgamill, Borers, Milling Machines, Grinders and Toolroom Equipment previously used by Cyrus Engineering

Engineering

'L''enchère se termine le'

mercredi 23 oct. 2019 at 03:00PM (BST)
Ajouter au calendrier

Temps restant

2 Jours, 23 Heures, 11 Min.

'Description de l''enchère'

Please Note: These lots are located in Wales.

Lots 2, 8 & 13 are located in Glamorgan all other lots are located in Swansea. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Buyer's premium

'La prime d''acheteur sera fixée à 16%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20%.'

Temps de consultation

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* 'Remarque: l''exactitude de toute traduction effectuée à l''aide de Google Translate n''est pas garantie. Une telle traduction n''est fournie qu''à titre indicatif. La description du lot en anglais est celle qui prévaut et repose sur les meilleures connaissances du commissaire des ventes. Toutefois, son exactitude n''est pas garantie et doit être vérifiée par l''acheteur avant l''enchère.'

Avis aux acheteurs

Date limite de paiement

25 oct. 2019 at 17:00 (BST)

'Date limite d''apurement'

7 nov. 2019 at 17:00 (GMT)

'Agents d''expédition'

Sous-traitants pour le stockage

Number of lots per page

Lots 1-10 de 97

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Fin:
23 oct. 2019 15:00:00 BST
Temps restant:
2 jours 23 h 11 min. 45 s.
Augmentation:
£250
Enchères:
0
Mise à prix
£6000
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 1: Everricho HD 1886B Vertical Machining Centre

Everricho HD 1886B Vertical Machining Centre with Fanuc 0i-MD Control, Table Size 1.8m x 860mm, 32-Station Tool Changer. S/No. 1886B-001 (2011)

Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
23 oct. 2019 15:00:00 BST
Temps restant:
2 jours 23 h 11 min. 45 s.
Augmentation:
£100
Enchères:
0
Mise à prix
£1000
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 2: Equipitop EMV 860 CNC Machining Centre

Equipitop EMV 860 CNC Machining Centre with Mitsubishi Control, table size 900mm x 560mm, 24 Station Tool Changer, BT40 Tooling

Please Note: This lot is located in Glamorgan, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
23 oct. 2019 15:00:00 BST
Temps restant:
2 jours 23 h 11 min. 45 s.
Augmentation:
£100
Enchères:
0
Mise à prix
£1000
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 3: Mikron VC1000C Vertical Machining Centre

Mikron VC1000C Vertical Machining Centre with Heidenhain TNC 407 Control, Table Size 1080mm x 580mm, Swarf Conveyor, 40-Station Tool Changer, Tool Holders. S/No. 142.11.80.8XX 

Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
23 oct. 2019 15:00:00 BST
Temps restant:
2 jours 23 h 11 min. 45 s.
Augmentation:
£250
Enchères:
2
Enchère actuelle:
£1250
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 4: Dugard Model 1300 Vertical Machining Centre

Dugard Model 1300 Vertical Machining Centre with Fanuc 0-MD Control, 20-Station ATC, Table Size 1450mm x 570mm. S/No. ML903003 

Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
23 oct. 2019 15:00:00 BST
Temps restant:
2 jours 23 h 11 min. 45 s.
Augmentation:
£250
Enchères:
0
Mise à prix
£1000
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 5: Yang Eagle SMV-1000 Vertical Machining Centre

Yang Eagle SMV-1000 Vertical Machining Centre with Fanuc O-MD Control, Table Size 1070mm x 500mm, 3 Axis, Qty Tool Holders. S/No. Z10846 (1999)

Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
23 oct. 2019 15:00:00 BST
Temps restant:
2 jours 23 h 11 min. 45 s.
Augmentation:
£250
Enchères:
0
Mise à prix
£7000
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 6: Butler Newall 3000 Elgamill Type Milling Machine

Butler Newall 3000 Elgamill Type Milling Machine with Heidenhain TNC 415 Control, Table Size 3.1m x 1.2m. S/No. 70011

Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
23 oct. 2019 15:00:00 BST
Temps restant:
2 jours 23 h 11 min. 45 s.
Augmentation:
£250
Enchères:
0
Mise à prix
£1500
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 7: Sculfort Supercap Senior 750 4000R Gap Bed Centre Lathe

Sculfort Supercap Senior 750 4000R Gap Bed Centre Lathe with Acu-Rite 2-Axis Digital Read Out, 1m 4-Jaw Chuck, Distance between centres 4m, 3-Jaw Steady. S/No. 125753

Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
23 oct. 2019 15:00:00 BST
Temps restant:
2 jours 23 h 11 min. 45 s.
Augmentation:
£250
Enchères:
0
Mise à prix
£1000
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 8: Butler Bed Mill

Butler Bed Mill, Table size 6m x 1.2m, Fagor Dro. S/No. 25907

Please Note: This lot is located in Glamorgan, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
23 oct. 2019 15:00:00 BST
Temps restant:
2 jours 23 h 11 min. 45 s.
Augmentation:
£250
Enchères:
0
Mise à prix
£2500
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 9: Poreba TR115B2/5M Gap Bed Centre Lathe

Poreba TR-115 B2/5M Gap Bed Centre Lathe with Acu-Rite 2-Axis Digital Read Out, 1m 4-Jaw Chuck, 5m Distance between centres, 2 3-Point Steadies. S/No. 7402-01-09031-07 

Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
23 oct. 2019 15:00:00 BST
Temps restant:
2 jours 23 h 11 min. 45 s.
Augmentation:
£250
Enchères:
0
Mise à prix
£3000
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 10: Poreba TRP 93 x 4m Gap Bed Centre Lathe

Poreba TRP 93 x 4m Gap Bed Centre Lathe with (2) x 3 Point Steady, 400mm Distance between centres, 4-Jaw Chuck 800mm. S/No. 7402-06-07008-00 (1998)

Please Note: This lot is located in Swansea, Wales. Unfortunately, there are no loading facilities on-site dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking