2816 - Engineering & Fabrication Equipment available on behalf of a Retained Client
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 41-50 de 78
Lot 42: Meddings Heavy Duty Pillar Drill
Meddings Heavy Duty Pillar Drill, Table 17" x 15", Speeds 90 - 1570rpm, Throat 11" 3MT, Power Feed
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 43: Elliott Model 16 Bench Drill
Elliott Model 16 Bench Drill, Capacity 13mm, 4 Speeds 460-2900rpm, Drilling Depth 87mm, Table Size 235mm x 235mm, Motot 3 Phase 1/2HP
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 44: Ajax Type B-16L Bench Drill
Ajax Type B-16L Bench Drill, 2 MT, Speeds 380 - 2800rpm, Table Size 11" x 11", Throat 81/4", 415V, Rise & Fall Table, Tilt & Spin Table
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 45: Putsch Meniconi Type SVP 145 Vertical Panel Saw
Putsch Meniconi Type SVP 145 Vertical Panel Saw, Capacity 4200mm x 2200mm, Maximum Cutting Thickness 60mm, Blade Size 250mm, Blade Speed 5300rpm, Single Phase, 3kw Motor
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 46: Behringer Type HBP-320A Automatic Bandsaw
Behringer Type HBP-320A Automatic Bandsaw, Capacity 320mm, Blade Speed 15-180m/min, Blade Size 4850 x 34 x 1.1mm
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 47: Startrite 18-V-10 Tool Room Vertical Bandsaw
Startrite 18-V-10 Tool Room Vertical Bandsaw, Table Size 19" x 19", Throat 18", Daylight 10", Speeds 56 - 3200fpm, Motor 1.1kw 3 Phase, Blade Welder
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 48: Addison Jubilee CJ225A Powered Hacksaw
Addison Jubilee CJ225A Powered Hacksaw, Power Downfeed, 225mm Capacity, Speeds 80, 100 & 125 Strokes/Min
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 49: Adira Model QH-10030 Press Brake
ADIRA Model QH-10030 Hydraulic Press Brake, Capacity 3000mm x 100 Ton, Upstroke Lower Beam, Front Driven Manual Back Gauge
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 50: K&B Down Stroke Hydraulic Press Brake
K&B Down Stroke Hydraulic Press Brake, Capacity 2500mm x 50 Ton, Distance Between Side Frames 2120mm, Manual Back Gauge, Light Guards, Foot Control
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 51: Guifil Type GHE-630 Hydraulic Power Guillotine
Guifil Type GHE-630 Hydraulic Power Guillotine, Capacity 3000mm x 6mm, Power Back Gauge, Rear Sheet Support with Front Supports & Squaring Arm
Please Note: The backstop is in need of attention.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.