2804 - Agie, Charmilles Wire & Spark Eroders, Eurospark EDM and Astro Robot Loaders no longer required

Engineering

'L''enchère se termine le'

jeudi 8 août 2019 at 03:00PM (BST)
Ajouter au calendrier

Temps restant

Temps écoulé

'Description de l''enchère'

Please Note: These lots are located in Birmingham. Please see individual lots for loading information.

Buyer's premium

'La prime d''acheteur sera fixée à 16%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20%.'

Temps de consultation

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* 'Remarque: l''exactitude de toute traduction effectuée à l''aide de Google Translate n''est pas garantie. Une telle traduction n''est fournie qu''à titre indicatif. La description du lot en anglais est celle qui prévaut et repose sur les meilleures connaissances du commissaire des ventes. Toutefois, son exactitude n''est pas garantie et doit être vérifiée par l''acheteur avant l''enchère.'

Avis aux acheteurs

Date limite de paiement

12 août 2019 at 17:00 (BST)

'Date limite d''apurement'

22 août 2019 at 17:00 (BST)

'Agents d''expédition'

Sous-traitants pour le stockage

Lots 1-10 de 13

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Fin:
08 août 2019 15:50:00 BST
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
14
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 200: Agie Cut Challenge 3 Wire Eroder

Agie Cut Challenge 3 Wire Eroder with Chiller, Table size 850mm x 550mm. S/No. 149 (2000) 

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

Preview image
Fin:
08 août 2019 16:20:00 BST
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
37
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 201: Agie Charmilles CUT 30 CNC Wire EDM

Agie Charmilles CUT 30 Submerged 5 Axis CNC Wire EDM with Auto Wire Thread, X, Y, Z 600 x 300 x 350mm, Maximum Workpiece dimensions, 25° Taper cut, AgieCharmilles Windows Based Control, AgieCharmilles Generator, Submerged Cutting to 350mm, Auto Wire Thread, Wire Capacity 0.15 - 0.30mm, Hand Box Control, Four Side Clamping Frame.

Please Note: this lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

Preview image
Fin:
08 août 2019 16:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
13
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 202: Agie Cut Classic 2S Wire Eroder

Agie Cut Classic 2S Wire Eroder with Chiller, Table size 700mm x 450mm. S/No. 008 (2000) 

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

Preview image
Fin:
08 août 2019 16:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
18
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 203: Agie Tron Innovation 2 Spark Eroder

Agie Tron Innovation 2 Spark Eroder, Table Size 600mm x 450mm, Tank Size 750mm x 550mm. S/No. 201

Please Note: Mecatool Chuck not included

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

Preview image
Fin:
08 août 2019 15:40:00 BST
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
28
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 204: Charmilles Robofil 330F-1 Spark Eroder

Charmilles Robofil 330F-1 Spark Eroder with Charmilles Fanuc Control. S/No. 390422 (1999)

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

Preview image
Fin:
08 août 2019 16:10:00 BST
Temps restant:
Enchère terminée
Augmentation:
£100
Enchères:
12
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 204A: Charmilles Robofil F400 Wire Cut Machine

Charmilles Robofil F400 Wire Cut Machine. No. 71046. M225, Part Maximum Dimensions:  X = 1200 x Y= 760 x Z = 200mm, Part Maximum Weight: 800kg, Work Tank dimension 1260 xy 800mm, Programme Loading via Dell Laptop with TU58 Tape System Emulator, Angle 0-30 degrees, Manual Wire Feed, Some Spares

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

Preview image
Fin:
08 août 2019 16:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
14
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 205: Agie Elox Mondo 20 Spark Eroder

Agie Elox Mondo 20 Spark Eroder, Table Size 400mm x 300mm, Tank Size 600mm x 400mm x 300mm Depth. S/No. M20 THK-005241 

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £200 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

Preview image
Fin:
08 août 2019 16:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£100
Enchères:
11
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 206: Eurospark EZE 2030 Manual ZNC EDM Machine

Eurospark EZE 2030 Manual ZNC EDM Machine with Eruospark EZE Control and Programmable Z Depth, 50 Amp Generator, Work Table Size 600mm × 300mm, Travel X, Y, Z 300mm x 200mm x 200mm, Ram Platen to Work Table 190 ~ 500mm, Max. Electrode Weight 75kg, Max. Workpiece Weight 900kg, Work Tank Size W × D × H 980mm × 550mm × 300mm (2003)

Please Note: This lot is located in Birmingham. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Preview image
Fin:
08 août 2019 16:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
15
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 206A: Agie Elox Mondo 30 Spark Eroder

Agie Elox Mondo 30 Spark Eroder, Table size 650mm x 510mm. S/No. MON 30 E-002014

Please Note: This lot is located in Birmingham. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Preview image
Fin:
08 août 2019 15:50:00 BST
Temps restant:
Enchère terminée
Augmentation:
£5
Enchères:
6
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 207: Astro Disc T 1500 Robot Loader

Astro Disc T 1500 Robot Loader. S/No. 2000/30

Please Note: For Spares and Repair Only - Pallets not included

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £100 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Catégories