2785 - Morgan Rushworth PBS 4100/240 CNC Press Brake, Nakamura and Mazak CNC Lathes, Hardinge Vertical Machining Centre, Mikron Milling Machine and Other Associated Toolroom Equipment
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Birmingham, Warwickshire, Co. Durham, High Wycombe and Tamworth. Please see individual lots for location and loading information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the
Auctioneer.
Please contact our Office on: +44 (0) 121 328 2424 or email
us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 55
Lot 1: Morgan Rushworth PBS 4100/240 CNC Press Brake
Morgan Rushworth PBS 4100/240 CNC Press Brake, 240-Ton Capacity, Bending Length: 4100mm R Axis, 22kw Motor. S/No. B23420 (2016)
Please Note: The perspex cover for the control is cracked.
Please Note: This lot is located in Birmingham. The charge attached to this lot for the electrical disconnection, emptying of any coolants and loading to a suitable vehicle will be £500 which will be automatically added to your invoice should you be successful in purchasing this item.
Available Due to Frustrated Export Sale
Lot 2: Nakamura Tome TW-10 CNC Lathe
Nakamura TW10 CNC Lathe with Fanuc Series Oi-TC Control. S/No. W101210, Twin Spindle, (2) 12-Station Turrets, 3-Jaw 700mm Chuck, 2-Jaw 700mm Chuck, Parts Catcher, Swarf Conveyor, Swarf Bin and Multifeed Short Magazine ML1 CNC Barfeed. S/No. 002383. (8) pieces of Live Tooling
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.
Lot 3: Mazak Super Quick Turn 28m CNC Lathe
Mazak Super Quick Turn 28M CNC Lathe with Mazatrol T Plus Control, 11” 3 Jaw Chuck, Tooleye, Tailstock, Swarf Conveyor, 12 Station Turret, C Axis, Live Tooling. S/No. 114726 (1995)
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.
Lot 4: HAAS TM1 CNC Toolroom Mill
HAAS TM1 CNC Toolroom Mill with HAAS Control (2005)
Please Note: This lot is located in Co. Durham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 5: Hardinge VM 1000II Vertical Machining Centre
Hardinge VM 1000II Vertical Machining Centre with Sinumerik Control, Table Size:1120mm x 510mm, 20-ATC. S/No. NVCA2D0028 (2002)
Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £200 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser.
Lot 5A: Mazak VQC 20-50B Vertical Machining Centre
Mazak VQC 20-50B Vertical Machining Centre with M2 Mazak Control, X-Axis Travel: 1,000mm, Y-Axis Travel: 508mm, Z-Axis Travel: 460mm, CAT 50 Spindle Taper, 24-Tool Magazine with a selection of Tool Holders and Pull Studs. S/No. 63464 (1985)
Please Note: This lot is located in Studley, Warwickshire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lot 6: Hurco BMC40 Vertical Machining Centre
Hurco BMC40 Vertical Machining Centre with Ultimax Split Screen Control, 4th Axis, 30-Station ATC, Table Size: 1300 x 700mm, Qty 10 Tools, Hurco 4th Axis, 8" 3 Jaw Chuck, 8" 4 Jaw Chuck. S/No. BL9-002-061 (1991) (Fixtures not included)
Please Note: This lot is located in High Wycombe. Unfortunately there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 6A: Qty of CAT40 Tooling
Qty of CAT40 Tooling
Please Note: This lot is located in High Wycombe. Unfortunately there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 6 & 6A
Combination of Lots 6 & 6A
6 - Hurco BMC40 Vertical Machining Centre with Ultimax Split Screen Control, 4th Axis, 30-Station ATC, Table Size: 1300 x 700mm, Qty 10 Tools, Hurco 4th Axis, 8" 3 Jaw Chuck, 8" 4 Jaw Chuck S/No. BL9-002-061 (1991) (Fixtures not included)
and
6A - Qty of CAT40 Tooling
Please Note: This lot is located in High Wycombe. Unfortunately there are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
6 | Hurco BMC40 Vertical Machining Centre |
6A | Qty of CAT40 Tooling |
Lot 7: Tos SUS-63 x 6500mm Centre Lathe
Tos SUS-63 x 6500mm Centre Lathe with Anilam Wizard 211 DRO, Swing Over Bed 655mm, Swing Over Cross Slide 390mm, Spindle Speeds 9 – 1120rpm, Spindle Bore 82mm, Tailstock, 400mm 3-Jaw Chuck (Fitted), 670mm 4-Jaw Chuck, (2) x Fixed 3-Point Steadies, Max Workpiece Weight 6,000kgs x 9rpm, Machine Length (approx.) 8,760mm, Machine Weight (approx.), 8,200kgs. S/No. 0440626
Please Note: This lot is located in Tamworth. Unfortunately, there are no loading facilites available on-site, dismantling and loading will be at the cost of the purchaser.