2765 – Bridgeport, Kafo & Kryle Vertical Machining Centres, Colchester, Denford & KIA Lathes, Milling Machines, Grinders and Other Associated Toolroom Equipment
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Burntwood and Tamworth. Please see individual lots for loading information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 45
Lot 11: MHP Kingsbury 65 CNC Lathe
MHP Kingsbury 65 CNC Lathe with Fanuc 18T Control with 300mm 3 Jaw Chuck, 12 Station Turret, Parts Catcher, Swarf Conveyor. S/No. 95-6-244K (1995)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 12: SUGA AT-25 CNC Lathe
SUGA AT-25 CNC Lathe with Fanuc OT Control, 300mm 3 Jaw Chuck, 12 Station Turret, Swarf Conveyor, Tooling. S/No. E-860
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 13: Denford Cyclone CNC Lathe
Denford Cyclone CNC Lathe on Bench with Fanuc OT Control, Swing Over Bed 300mm, Max. Turning Length 200mm, X Travel 94mm, Z Travel 210mm, 6 Station Turret, 150mm 3 Jaw Chuck, Manual. S/No. CY1000 20AI
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 14: Denford Cyclone CNC Lathe
Denford Cyclone CNC Lathe on Bench with Fanuc OT Control, Swing Over Bed 300mm, Max. Turning Length 200mm, X Travel 94mm, Z Travel 210mm, 6 Station Turret, 150mm 3 Jaw Chuck, Manual. S/No. CY1000 29A
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 15: XYZ DPM 4000 Bed Mill
XYZ DPM 4000 Bed Mill with Proto Trak Mx 2 Control, 58" x 14" Table, 40 Int. Variable Speed Head, 5 Hp. Spindle Motor, Longitudinal Travel: 40", Cross Travel: 20, Vertical Travel: 23". S/No. 7974 (1996)
Please Note: This Lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 16: Lillian CNC Bed Miller
Lillian CNC Bed Miller with 3 Axis Anilam 3300 MK Control with 40 INT Spindle Taper, Table size 1530mm x 300mm
Please Note: This lot is located in Burntwood. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. This Item however will be skated to the door ready for collection.
Lot 17: Colchester Mastif VS 1800 Centre Lathe
Colchester Mastif VS 1800 Centre Lathe, 554mm X 3000mm Gap Bed Capacity, 3 & 4 Jaw Chucks. Chuck Guard, Newall C80 2 Axis Digital Read Out, Quick Change Tool Post Plus Holders, Metric Dials. Metric Lead Screw, Metric & Imperial Screw Cutting, 90mm Spindle Bore, 830mm Swing in Gap (2007)
Please Note: This Lot is located in Burntwood. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. This Item however will be skated to the door ready for collection.
Lot 18: Colchester Mascot VS 2000 Centre Lathe
Colchester Mascot VS 2000 Centre Lathe, 460mm x 2000mm Gap Bed Capacity, 3 & 4 Jaw Chucks. Chuck Guard, 2 & 3 Point Steadies, Sony Lh32, 2 Axis Digital Read Out, Quick Change Tool Post Plus Holders, Metric Dials, Metric Lead Screw, Metric & Imperial Screw Cutting, 76mm Spindle Bore, 730mm Swing In Gap. S/No. Mc 0111.
Please Note: This Lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 19: Gate ECL 550 Gap Bed Lathe
Gate ECL 550 Gap Bed Lathe with Anilam 4200T Control, 8
station VDI Turret, 2,000mm Between Centres, Swing 550mm, Spindle
Speed 80-3,500rpm, 4 Jaw Powered Chuck, 80mm Spindle Bore,
A2-8 Spindle Nose, Tailstock, Coolant, Swarf Conveyor,
Tooling.
S/No. 071115632 (2007)
Please Note: This Lot is located in Tamworth and will be
loaded free of charge to a suitable vehicle. Blocking and securing
will be at the cost of the purchaser.
Lot 20: Colchester 2000 Lathe
Colchester 2000 Lathe 15” x 50” Gap Bed Capacity, 3 & 4 Jaw Chucks, Quick Change Tool Post & Holders, 2 Axis DRO, Ainjest Rapid Threading, 23” Swing In Gap. S/No. 34181
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.