2763 - CNC Bedmills, Lathes, General Workshop Equipment and Ancillaries no longer required by Torneria Meccanica Raimondi Pierangelo, Italy
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +39 0732 677 063 or email us at: info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 129
Lot 11: PBR T-400 Parallel Lathe
PBR T-400 Parallel Lathe, 3-Jaw Chuck diameter 430mm, Distance between Centres 1600mm, Bore Size 130mm, 3-Jaw Chuck 350mm with Gapbed.
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 12: Momac Tormio Parallel Lathe
Momac Tormio Parallel Lathe with 2100mm distance between Centres, 3-Jaw Chuck Diameter 310mm, 3-Point Steady, 2-Point Steady, Gap Bed and Quick-Change Tooling. S/No. 43445 (2002)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 12A: Quick Change Tooling for Momac Tormio Parallel Lathe
Quick Change Tooling for Momac Tormio Parallel Lathe
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 12 & 12A
Combination of Lots 12 & 12A
Momac Tormio Parallel Lathe with 2100mm distance between Centres, 3-Jaw Chuck Diameter 310mm, 3-Point Steady, 2-Point Steady, Gap Bed and Quick-Change Tooling. S/No. 43445 (2002)
and
Quick Change Tooling for Momac Tormio Parallel Lathe
Please Note: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 12 | Momac Tormio Parallel Lathe |
| 12A | Quick Change Tooling for Momac Tormio Parallel Lathe |
Lot 13: Tiger FU120 Milling Machine
Tiger FU120 Milling Machine with Table Size 1300mm x 300mm and Tooling Bench
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 14: Tiger FU3L-2-71 Milling Machine
Tiger FU3L-2-71 Milling Machine with Table Size 1600mm x 310mm with Vertical Head and Viking Automation DRO
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 15: Cams 250 SAC Shaper
Cams 250 SAC Shaper with Table Size 560mm x 340mm. S/No. 12537 (1988)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 16: Azimut 2m Radial Drill
Azimut 2m Radial Drill, Type 1600 X50 with Box Table 630mm x 500mm x 500mm. S/No. 1528A (2002)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 17: Sasso Torimo TRL 1300 1.6m Radial Drill
Sasso Torimo TRL 1300 1.6m Radial Drill with Box Table 500mm x 630mm x 500mm. S/No. 1390 (1965)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 18: Bimak Model 25CR Drill
Bimak Model 25CR Drill
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.