2754 - CNC Machine Tools and Toolroom Equipment previously used by a UK Based Precision Manufacturing Company & Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 18
Lot 200: Haas VF0 Vertical Machining Centre
Haas VF0 Vertical Machining Centre, Table size 660 x 356mm, Travel 508 x 406 x 508mm, BT40 Tooling, 20 ATC, 7500rpm, 5.6kw. S/No. 4142 (1995)
Please Note: This lot is located in Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 201: Hurco VSX24 Vertical Machining Centre
Hurco VSX24 Vertical Machining Centre with Ultimax SSM Control, Table size 760 x 510mm, Travel 610 x 510 x 610mm, CAT40 Tooling, 10,000rpm, 24 ATC, Rigid Tapping. S/No. S242—06104012BFA (2002)
Please Note: This lot is located in Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 202: Traub TNS30 CNC Lathe
Traub TNS30 CNC Lathe with Traub TX8 Control, Driven Tooling, 30mm Bar Capacity, 140mm Turning Diameter, 220mm Turning Length, 12-Station Turret, VDI30 Tooling, Single Turret, C-Axis, No Tailstock (1986)
Please Note: This lot is located in Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 203: Daewoo Puma 200MC CNC Lathe
Daewoo Puma 200MC CNC Lathe with Fanuc 0T Control, Driven Tooling, C-Axis, Turning Diameter: 300mm x 513mm Length, 65mm Bar Capacity, 12-Station Turret, Collet Chuck, 3-Jaw Chuck, Parts Catcher, Q Setter, Driven Toolholders, No Tailstock, Machine Manuals. S/No. 20MS0128 (1998)
Please Note: This lot is located in Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 204: Bridgeport ITL 400 Lathe
Bridgeport ITL 400 CNC Lathe with Fanuc 21i Control, 8 Station VDI30 Duplomatic Turret, 400mm Swing, 1250mm Centres, Spindle: D1-6 Bored: 54mmØ, Spindle Speed 28-2500rpm, 5MT Tailstock. S/No. B70009 (2002)
Please Note: This lot is located in Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 205: XYZ Proturn 410 Lathe
XYZ Proturn 410 Lathe with LX2 Control, 10" Chuck, Quick Change Tool Post, Gap Bed, Tailstock, Swing Over Bed 470mm, Gap 730mm, between Centres 1250mm, Spindle Bore 80mm, 2300rpm. S/No. 252
Please Note: This lot is located in Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 206: Harrison Alpha 330T CNC Lathe
Harrison Alpha 330T CNC Lathe with Harrison/Fanuc Operator Screen, 3-Jaw Chuck, Quick Change Tool Post and 12 Holders, Centre Height: 167mm, Distance between Centres: 1000mm, Spindle Bore: 40mm, 3500rpm. S/No. D20007 (2002)
Please Note: This lot is located in Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 207: Tornos Robobar SBF326E Magazine Barfeed
Tornos Robobar SBF326E Magazine Barfeed. S/No. 3538-14/10 (2014)
Please Note: This lot is located in Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 208: X-Tract Bar Unloader
X-Tract Bar Unloader. S/No. 5097 (2004)
Please Note: This lot is located in Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 209: Agie Agiecut Challenge 2 Wire Erosion Machine
Agie Agiecut Challenge 2 Wire Erosion Machine with Agievision Control, width: 2215mm x depth: 2215mm x height: 2220mm, weight: 3600kg, Wire diameter: 0.1 - 0.33mm, X-Axis Movement: 350mm, Y-Axis Movement: 250mm, Z-Axis Movement: 256mm, A-Axis Movement: 70mm, Workpiece X: 750mm, Workpiece Y: 550mm, Workpiece Z: 250mm, Workpiece weight: 450kg, Connection: 400 V/50 HZ, Consumption: 9kVA.S/No. 0091 (2000)
Please Note: This lot is located in Sussex and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.