2739 - CNC Lathes, Machining Centres and Toolroom Equipment previously used by CovAPEX Engineering Ltd & Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Coventry. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lots 23, 23A and 24 are located in Birmingham. Please see individual lots for loading information and fees.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 26
Lot 1: Hyundai SPT-V30T Machining Centre
Hyundai SPT-V30T Machining Centre with Yasnac Control, 14-Station ATC, Table Size 600mm x 380mm. S/No. 70A7 – 016
Please Note: This lot is located in Coventry. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 2: Mazak MTV 414 Machining Centre
Mazak MTV 414 Machining Centre with Mazatrol M32B Control, 23-Station ATC, Swarf Conveyor, Table Size 900mm x 400mm, Kitagawa Indexer Rotary Table, 4/4 Machining Centre with Kitagawa Mac Mini Control. S/No. 103590-U (1996)
Please Note: This lot is located in Coventry. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 3: Yang Eagle SMW 1000 Vertical Machining Centre
Yang Eagle SMW 1000 Vertical Machining Centre with Fanuc Series 0-MD Control, Table Size 1070mm x 500mm, 20-Station ATC. S/No. Z10144 (1998)
Please Note: This lot is located in Coventry. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 4: Yang Eagle SMV 600 Vertical Machining Centre
Yang Eagle SMV 600 Vertical Machining Centre with Fanuc Series 0-MD Control, Table Size 750mm x 360mm, 20-Station ATC. S/No. Z00249 (1997)
Please Note: This lot is located in Coventry. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 5: Hyundai Quickturn 28 CNC Lathe
Hyundai Quickturn 28 CNC Lathe with Mazatrol T32B Control, 8-Station Turret, Tailstock, 10’’ 3-Jaw Chuck.
Please Note: This lot is located in Coventry. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 6: Mazak Quick Turn QTN 30 CNC Lathe
Mazak Quick Turn QTN 30 CNC Lathe with Mazatrol T Plus Control with 8-Station Turret, Swarf Conveyor, 10’’ 3-Jaw Chuck, Tooleye. S/No. 112269
Please Note: This Machine has a fault with the Spindle
Drive Board, please take this into account when you are placing
bids, sale for spares and repair
Please Note: This lot is located in Coventry. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 7: Mazak Quickturn 15N CNC Lathe
Mazak Quickturn 15N CNC Lathe with Mazatrol T32B Control, Swarf Conveyor, 8’’ 3-Jaw Chuck, 12-Station Turret, Tooleye. S/No. 112269
Please Note: This lot is located in Coventry. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 8: Mazak Quick Turn 10N CNC Lathe
Mazak Quick Turn 10N CNC Lathe with Mazatrol Cam T-2 Control with 8 Station Turret, 8’’ 3 Jaw Chuck, Tooleye.
Please Note: This lot is located in Coventry. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 9: Mori Seiki CL-25 CNC Lathe
Mori Seiki CL-25 CNC Lathe with Mazatrol CAM T-2 Control, 8-Station Turret, 8’’ 3-Jaw Chuck, Tooleye.
Please Note: This lot is located in Coventry. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Lot 10: Mori Seiki SL-3 CNC Lathe
Mori Seiki SL-3 CNC Lathe with Fanuc Control, Swarf Conveyor, 10" 3-Jaw Chuck, 12-Station Turret.
Please Note: This lot is located in Coventry. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.