2727 - Removed lots
L'enchère s'est terminée le
Temps restant
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 42
Lot 2: JOMAR EBM 6.0 Extrusion Blow Moulding Machine
JOMAR EBM 6.0 Extrusion Blow Moulding Machine. S/No. JO597004 (2002) with Control Panel, Piovan Hopper Loader and Dosing Unit, 70mm Extruder, 2 Heads, Distance Between Heads 150mm, Clamping Force 120daN, Bonfiglioli Engineering Leak Detector, used to Produce 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €550
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 2A: Moulds for JOMAR EBM 6.0
Moulds for JOMAR EBM 6.0
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €20
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 2 & 2A
Combination of lots 2 & 2A
JOMAR EBM 6.0 Extrusion Blow Moulding Machine. S/No. JO597004 (2002) with Control Panel, Piovan Hopper Loader and Dosing Unit, 70mm Extruder, 2 Heads, Distance Between Heads 150mm, Clamping Force 120daN, Bonfiglioli Engineering Leak Detector, used to Produce 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
and
Moulds for JOMAR EBM 6.0
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €570
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 2 | JOMAR EBM 6.0 Extrusion Blow Moulding Machine |
| 2A | Moulds for JOMAR EBM 6.0 |
Lot 3: MAGIC EPL/58/ND/XL Electric Extrusion Blow Moulding Machine
MAGIC EPL/58/ND/XL Electric Extrusion Blow Moulding Machine. S/No. 30-04 (2004) with Control Panel, Integrated Leak Detector, Air Conditioned Electrical Cabinet, 80mm Extruder, 4 Heads, Distance Between Heads 120mm, Clamping Force 100KN, used to produce 0.75 - 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €1100
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3A: Spares for MAGIC BLOW Moulders
Spares for MAGIC BLOW Moulders
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €20
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3B: Spare Electric Motor for MAGIC Blow Moulder
Spare Electric Motor for MAGIC Blow Moulder
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €20
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 3, 3A & 3B
Combination of lots 3, 3A & 3B
MAGIC EPL/58/ND/XL Electric Extrusion Blow Moulding Machine. S/No. 30-04 (2004) with Control Panel, Integrated Leak Detector, Air Conditioned Electrical Cabinet, 80mm Extruder, 4 Heads, Distance Between Heads 120mm, Clamping Force 100KN, used to produce 0.75 - 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
and
Spares for MAGIC BLOW Moulders
and
Spare Electric Motor for MAGIC Blow Moulder
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €1140
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 3 | MAGIC EPL/58/ND/XL Electric Extrusion Blow Moulding Machine |
| 3A | Spares for MAGIC BLOW Moulders |
| 3B | Spare Electric Motor for MAGIC Blow Moulder |
Lot 5: MAGIC EPL/58/ND/XL Electric Extrusion Blow Moulding Machine
MAGIC EPL/58/ND/XL Electric Extrusion Blow Moulding Machine. S/No. 28-04 (2004) with Control Panel, Integrated Leak Detector, Air Conditioned Electrical Cabinet, 80mm Extruder, 2 Heads, Distance Between Heads 210mm, Clamping Force 100KN, used to produce 0.75 - 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €1450
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 5A: Moulds for MAGIC Blow Moulders Machines (7) Pallets
Moulds for MAGIC Blow Moulders Machines (7) Pallets
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €60
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 5B: Spares for MAGIC Blow Moulders Machine
Spares for MAGIC Blow Moulders Machine
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €10