2726A - Phase 2 - Large Quantity of Tooling surplus to the ongoing requirements of Howden CKD Compressors s.r.o.

En collaboration avec

Engineering

L'enchère s'est terminée le

2019-02-07 14:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location: These lots are located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 21.00%.'

Temps de consultation

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Czech Republic export conditions and the obtaining of any applicable Export Licences

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2019-02-11 17:00:00.0

'Date limite d''apurement'

2019-02-21 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 51-60 de 75

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
07 févr. 2019 15:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 354: Cupboard with Clamps, Cutters, Drills

Cupboard with Clamps, Cutters, Drills

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
07 févr. 2019 14:20:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 355: Cupboard with Clamps, Cutters, Boring Head, Boring Bars

Cupboard with Clamps, Cutters, Boring Head, Boring Bars

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
07 févr. 2019 14:40:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 356: Cupboard with Clamping Sets

Cupboard with Clamping Sets

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
07 févr. 2019 14:20:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 357: Cupboard with Clamping Sets

Cupboard with Clamping Sets

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
07 févr. 2019 15:20:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 358: Cupboard with Clamping Sets

Cupboard with Clamping Sets

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
07 févr. 2019 14:20:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 359: Cupboard with Clamps

Cupboard with Clamps

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
07 févr. 2019 15:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 360: Cupboard with Parallels, Riser Blocks, Cutters, ISO 50 Tooling, (2) Chucks, (2) Vices, Clamping Sets

Cupboard with Parallels, Riser Blocks, Cutters, ISO 50 Tooling, (2) Chucks, 2 Vices, Clamping Sets

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
07 févr. 2019 14:20:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 361: Cupboard with Cutters, ISO 50 Tooling

Cupboard with Cutters, ISO 50 Tooling

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
07 févr. 2019 14:20:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 362: Cabinet with Cutters, Vice, ISO 50 Tooling, (2) Vices

Cabinet with Cutters, Vice, ISO 50 Tooling, (2) Vices

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Fin:
07 févr. 2019 15:30:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
21.00%

Lot 363: Cabinet with Cutters, ISO 50 Tooling, Boring Head

Cabinet with Cutters, ISO 50 Tooling, Boring Head

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories