2644 - CNC Machining Centres, Wire EDM Machines, Toolroom Machinery and Ancillary Equipment no longer required by Roxill Engineering & Hydraulics Ltd and Others
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These Lots are located in Birmingham & Tamworth
Please see individual lots for location and loading information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the
Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or
email: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 91
Lot 11: Charmilles Robofil 290 CNC Wire EDM Machine
Charmilles Robofil 290 CNC Wire EDM Machine with Auto Wire Thread, Axis Travel X 400mm, Y 250mm, Z 200mm, Maximum Work Piece dimensions. X 850mm, Y 500mm, Z 200mm, 30° Taper cut, Charmilles CNC Control, Non-Submerged Cutting, Auto Wire Thread, Wire capacity 0.1 - 0.3 mm, with optional Guides, Hand Box Control, CRT Screen Monitor, Three Side Clamping Frame, USB Floppy Drive Emulator. S/No. 330069 (1995)
Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser.
Lot 12: Baron-Max KE-550 ZNC, Manual ZNC EDM Machine
Baron-Max KE-550 ZNC, Manual ZNC EDM Machine, Axis Travel X, Y, Z 550 x 350 x 250mm, Work Table 800mm x 450mm, Work Tank Dimensions 1170mm x 690mm x 425mm, ZNC Control with 3 axis Display, Programmable Z axis with depth Stop Function, 50A Generator, Low Volt Work Lamp. S/No.0699386 (1997)
Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser.
Lot 13: Hitachi H-CUT 203M CNC Wire EDM Machine
Hitachi H-CUT 203M CNC Wire EDM Machine, Axis Travel X, Y, Z 320 x 250 x 160mm, Maximum Workpiece Dimensions 450mm x 350mm x 170mm, Max taper +/-12 Degree, Fanuc CNC Control, Filter unit. S/No. D310518011 (1988)
Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing will be at the cost of the Purchaser.
Lot 14: Colchester Mascot 1600 Gap Bed Lathe
Colchester Mascot 1600 Gap Bed Lathe, 12’’ 3-Jaw Chuck, 3-Point Steady, 2-face plates 21’’, 27’’, Rapid Threader Attachment, Quick Change Tooling & Soft Jaws. S/No. 7/0213/13774 DD
Please Note: This lot is located in Birmingham. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.
Lot 15: Colchester Mascot 1600 Lathe
Colchester Mascot 1600 Lathe 4ft between Centres, 250mm Gap, 16" 4-Jaw Chuck, Newhall B60 Dro. S/No. 7/0001/10845
Please Note: This lot is located in Birmingham and can be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 16: Colchester Triumph 2000 Gap Bed Lathe
Colchester Triumph 2000 Gap Bed Lathe, 250mm 3-Jaw Chuck, 12’’
4-Jaw Chuck, 14’’ Face Plate, 3-Point Steady and Qty of Soft Jaws,
Ainjest high speed screw cutting attachment, Quick Change Tooling.
S/No. 6/0044/31709
Please Note: This lot is located in Birmingham.
Unfortunately, there are no loading facilities available.
Dismantling and loading will be at the cost of the purchaser.
Lot 17: Colchester Triumph 2000 Gap Bed Lathe
Colchester Triumph 2000 Gap Bed Lathe, 250mm 3-Jaw Chuck, 12’’
4-Jaw Chuck, 14’’ Face Plate, 3-Point Steady and 2 Point Steady,
Ainjest high speed screw cutting attachment, Quick Change Tooling
& Soft Jaws. S/No. 6/0044/29915
Please Note: This lot is located in Birmingham.
Unfortunately, there are no loading facilities available.
Dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 17A: Quick Change Tooling
Quick Change Tooling
Please Note: This lot is located in Birmingham.
Unfortunately, there are no loading facilities available.
Dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 17B: Quick Change Tooling
Quick Change Tooling
Please Note: This lot is located in Birmingham.
Unfortunately, there are no loading facilities available.
Dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination to include Lots 17, 17A & 17B
Combination to include Lots 17, 17A & 17B
Colchester Triumph 2000 Gap Bed Lathe, 250mm 3-Jaw Chuck, 12’’ 4-Jaw Chuck, 14’’ Face Plate, 3-Point Steady and 2 Point Steady, Ainjest high speed screw cutting attachment. S/No. 6/0044/29915
and
Quick Change Tooling
and
Quick Change Tooling
Please Note: These Items are located in Birmingham. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
17 | Colchester Triumph 2000 Gap Bed Lathe |
17A | Quick Change Tooling |
17B | Quick Change Tooling |