2622A - Phase 2, Spirka, Wardwell Speedmaster Carrier Braiders and Tecnomac Bobbin Winders for Wire and Cable Manufacturing no longer required by Mantovani & Serrazi Srl

En collaboration avec

Engineering

L'enchère s'est terminée le

2017-11-16 14:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location: These Items are located in Druento, Turin, Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Prime d'acheteur

'La prime d''acheteur sera fixée à 18.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'

Temps de consultation

Viewing is available by appointment only with the Auctioneer

Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2017-11-20 17:00:00.0

'Date limite d''apurement'

2017-11-30 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 111-120 de 146

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
16 nov. 2017 15:20:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 150: TECNOMAC P38 Bobbin Winders with Bucket Payoff

TECNOMAC P38 Bobbin Winders with Bucket Payoff

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser

Preview image
Fin:
16 nov. 2017 14:50:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 151: TECNOMAC P38 Bobbin Winders with Bucket Payoff

TECNOMAC P38 Bobbin Winders with Bucket Payoff

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser

Preview image
Fin:
16 nov. 2017 14:20:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 152: TECNOMAC P38 Bobbin Winders with Bucket Payoff

TECNOMAC P38 Bobbin Winders with Bucket Payoff

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser

Preview image
Fin:
16 nov. 2017 14:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 153: TECNOMAC P38 Bobbin Winders with Bucket Payoff

TECNOMAC P38 Bobbin Winders with Bucket Payoff

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser

Preview image
Fin:
16 nov. 2017 14:50:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 153A: Qty of Racks with Bobbings

Qty of Racks with Bobbings

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Preview image
Fin:
16 nov. 2017 14:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 161: Mobile Trolley Loader for Spirka Machine for 1m Reels

Mobile Trolley Loader for Spirka Machine for 1m Reels

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at theost of purchaser.

Preview image
Fin:
16 nov. 2017 14:30:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 162: Mobile Trolley Loader for Spirka Machine for 1m Reels

Mobile Trolley Loader for Spirka Machine for 1m Reels

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Preview image
Fin:
16 nov. 2017 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 164: HIPOTRONICS HD100 HiPot Tester

HIPOTRONICS HD100 HiPot Tester

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser

Preview image
Fin:
16 nov. 2017 14:50:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 164B: Officine Omega Rosso – Cos Tamora.

Officine Omega Rosso – Cos Tamora. S/No. 17608 64841

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser.

Preview image
Fin:
16 nov. 2017 15:10:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
18.00%
Taux de TVA:
22.00%

Lot 165: BRITISH PHYSICAL LABS RM215-L AC/DC Breakdown & Ionization Tester

BRITISH PHYSICAL LABS RM215-L AC/DC Breakdown & Ionization Tester

Please Note: This Item is located in Druento, Turin. Italy. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of purchaser

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories