2562 - CNC Lathes, Machining Centres, Grinders, Conventional Equipment & Injection Moulding
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: Lots 302, 303, 304, 305, 308 and 314 are located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Please Note: Lots 305A & 305B are located in Blackburn and must be removed and loaded by an authorised transport company, quotes are available upon request.
Please Note: Lot 321A is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Please Note: All other lots are located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing is available by appointment only with the Auctioneer
Please contact our Office on: +44 (0) 121 328 2424 or email
us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 56
Lot 300: Yamazaki Mazak Slant Turn 50 CNC Lathe
Yamazaki Mazak Slant Turn 50 CNC Lathe with Mazatrol PC-Fusion-CNC 640T Control, Standard Cutting diameter: 560mm, Max. Swing: 805mm, Spindle Speed: 1,600rpm, 104mm Spindle Bore, 15-Station Turret, Tailstock, Coolant System (2006)
Please Note: This item is located in Birmingham, West Midlands and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.
Lot 301: Takisawa Type TD 260 Twin Spindle CNC Lathe
Takisawa Type TD 260 Twin Spindle CNC Lathe with Fanuc Control System, axis travels Head 1 X 200mm Z 280mm C 360 degrees Head 2 X 205mm Z 820mm C 360 degrees Rapid Feed rates 20 M/min, 12 Station Turrets all of which can be driven positions, fitted with 8 Chucks, Spindle maximum speed 8000rpm, Tool Presetter, Fume Extraction. S/No. TALDS1008
Please Note: All other lots are located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 302: Doosan Twin Spindle Vertical Lathe Type V450TM
Doosan Twin Spindle Vertical Lathe Type V450TM with Fanuc 18iTB Control System, Axis Travels X = 240mm Z = 430mm C = 0.001 degrees, rapid feed rates 20m/min, maximum RPM 2500, 12 Station Turrets, all stations can be driven, Automatic Doors, Twin Swarf Conveyors, S/No. 1014 (2005)
Please Note: This item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.
Lot 303: Daewoo ACE-HP5000 Twin Pallet Horizontal Machining Centre
Daewoo ACE-HP5000 Twin Pallet Horizontal Machining Centre with Fanuc 18i-MB Control, Max. Spindle Speed: 14,000rpm, BT 40 Spindle Taper, X = 850mm, Y = 700mm, Z = 750mm, Rapid Feed Rate: 48m/min, Pallet Dimensions: 500 x 500mm, 60-Station ATC, Through Spindle Coolant, Renishaw NC4 Tool Presetter, Renishaw Probe Interface (please note: there is no probe included with this machine), Swarf Conveyor, Spindle Chiller. S/No. HP540065 (02/2005)
Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 304: HAAS HS-1RPHE Twin Pallet Horizontal Machining Centre
HAAS HS-1RPHE Twin Pallet Horizontal Machining Centre with HAAS Control, Max. Spindle Speed: 10,000rpm, 30HP High Torque Spindle, BT 40 Spindle Taper, X = 600mm, Y = 500mm, Z = 500mm, Rapid Feed Rates: 40m/min, Pallet Dimensions: 400 x 400mm, 120-Station ATC, Through Spindle Coolant, Renishaw NC4 Tool Presetter, Swarf Screw. S/No. 51051 (07/2001)
Please Note: This Item is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 305: Mazak AJV 32/604N Bridge Type Vertical Machining Centre
Mazak AJV 32/604N fitted with Mazatrol M32 control system. Axis travels X=1500mm Y=700mm Z=460mm. Maximum spindle speed 4000rpm. ISO40 spindle taper. 40 Station ATC. Table dimensions 1740mmx650mm. Distance between columns 800mm. Maximum load on table 1500Kg. S/No. 106449 (1993)
Please Note: This Lot is located in Gloucester and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 305A: Mazak Type AJV-18 Vertical Machining Centre
Mazak Type AJV-18 Vertical Machining Centre with Mazatrol M-32 Control, Table Size: 900mm x 410mm, Spindle Taper: 40 ISO, Swarf Conveyor
Please Note: This Item is located in Blackburn and must be removed and loaded by an authorised transport company, quotes are available upon request.
Lot 305B: Mazak Type Mazatech V-550 Vertical Machining Centre
Mazak Type Mazatech V-550 Vertical Machining Centre with Mazatrol M-32 Control, Table Size: 1400mm x 660mm, Spindle Taper: 50 ISO & Swarf Conveyor
Please Note: This Item is located in Blackburn and must be removed and loaded by an authorised transport company, quotes are available upon request.
Lot 306: Correa CF/22 CNC Bed Type Milling Machine
Correa CF/22 CNC Bed Type Milling Machine with Heidenhain TNC Control, X= 2000mm, Y = 800mm, ISO 50 Spindle Taper, Max Table Load 3500kg. S/No. 9670107 (1996)
Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 307: Bridgeport VMC 1000/22 Machining Centre
Bridgeport VMC 1000/22 Machining Centre with Heidenhain TNC 370 Control, Table size 1150mm x 490mm, 22 Station ATC, S/No. 721930 (1998)
Please Note: This item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.