Alfa Laval P605 Centrifugal Pump 2KW, LKH 10/138 with stainless steel cover, 2 inch inlet. S/No. 38373 (2001)

Alfa Laval MR 185A Centrifugal Pump Q FLOW WATER 25 M/3 PER HOUR, 2 inch inlet. S/No. 31438-14596

Tecno Auxiliary Hopper Feeder with Elevator

Alfa Laval MR 185A Centrifugal Pump 7.5kw with stainless steel cover, 3 inch inlet. S/No. 35057 (2001)

Alfa Laval LKH 10/163 Centrifugal Pump 3kw with stainless steel cover, 2 inch inlet. S/No. 47277 (2002)

Alfa Laval LKH 10/163 Centrifugal Pump 3kw with stainless steel cover, 2 inch inlet. S/No. 47276 (2002)

Alfa Laval LKH 10/163 Laval Valve Skid Stainless steel skid with 5 Alpha Laval Thinktop valves

Alfa Laval LKH 10/163 Valve Skid Stainless steel skid with 19 Alpha Laval Thinktop valves

Pall SASE033G36JFB Filter Housing 34 Ltr 316 Stainless Steel filter housing, -1/10 BAR, -14.5/150 PSI, -10/140 Degrees Celsius

Danfoss / Alfa Laval Valve Skid Stainless steel skid with 2 Danfoss MAG 6000 / MAG 100 FOOD Ceramic flowmeters, 4 Alfa Laval Thinktop valves, 2 x Samson 3760 Electro pneumatic valves

Alfa Laval LKH 10/163 Centrifugal Pump 3kw with stainless steel cover, 3 inch inlet. S/No. 47280 (2002)

Beverage Technic International Centrifugal Spring water Pump, with stainless steel cover, 3 inch inlet S/No. P403 35221

Flow Plate 6 port flow plate with 3 sensor points, 2 inch inlet/outlet, includes 2 x DPL valves, pipework not included and will be disconnected at nearest flange or weld

Mechnical Bowl Feeder Cap Code: 13796

Flow Plate 5 port flow plate with 3 sensor points, 2 inch inlet/outlet, includes 2 x DPL valves, pipework not included and will be disconnected at nearest flange or weld

APV 7341 Powder Mix tank Line 6 1500 Ltr approx. 316 Stainless steel mixing tank, top manway, Silverson GX107 / 1560 agitator with 7.5kw drive @50Hz , 1445 R/M, 2 inch outlet pipe. S/No. 50108 / 06

Alfa Laval 185A Centrifugal Pump 7.5kw @50hz with stainless steel cover, 2 inch inlet, 2900 R/m. S/No. 31438-14595

Centrifugal Pump Flow rate for water 25 m3 / h, 2 inch inlet pipe

Powder Hopper Line 5 Stainless Steel Conical bottom hopper with 2 inch bottom outlet, manway top, probe point, pressure release vent

Fristam FZ17 A Centrifugal Pump 5.5kw, Stainless Steel cover. S/No. 540460011

Scanima Mixer 1R2-1500V Integrated Mixing Station 1500 Ltr 316 Stainless steel Mixing tank with bottom agitation, Temp range 0 - 100 degrees Celsius, top manway, tank inspection light. S/No. 5947-02

Tetra Pak Alex 25 Homogeniser line 5 5 10,000 Ltr l/h, Max pressure 200 bar, Motor 75kw, 1485 rpm,

Alfa Laval C8-SR Plate Heat exchanger 156 Ltr volume, design temp 110 Degrees Celsius, Design pressure 10 bar, approx. 100 plates. S/No. 30104-21651 (2003)

Mixing tank Line 7, 6,000 Ltr approx. 316 Stainless Steel single skin on legs with Lightnin agitator, sample port, top manway, inspection window, DIA 190cm H 220cm approx. S/No. 36556

Tecno Infeed Conveyor/Descrambler

Mixing Tank Line 7, 6,000 Ltr approx. 316 Stainless Steel Single Skin on Legs with Lightnin Agitator, Sample Port, Top Manway, Inspection wWindow, DIA 190cm H 220cm approx. S/No. 36557

Alfa Laval CLIP 6-RM Heat Exchanger 93.7 Ltr Volume, test pressure 13 bar, max temp 130 degrees Celsius, approx. 100 plates. S/No. 30101-24882 (1997)

Tetra Pak Alex 25 Homogeniser Line 6 10,000 Ltr l/h, Max pressure 200 bar, Motor 75kw, 1481 rpm. S/No. T5845521221 (2001)

Alfa Laval C8-SR Heat Exchanger 121 Ltr volume, design pressure 10 bar, design temp -10/130 degrees Celsius, 110 plates approx. S/No. 30103-38474 (2001)

Tetra Pak ALCIP 100 CIP Station with Alpha Laval 5.5kw centrifugal Pump, Tetra Spiraflow Tube & Shell Heat Exchanger, Balance Tank and Valves. S/No. T5845650212/-144 (2002)

Tetra Pak ALCIP 100 CIP Station Automatic CIP with Alfa Laval 5.5kw Centrifugal Pump, Tetra Spiraflow Tube & Shell Heat Exchanger, Balance Tank and Valves. S/No. T5845650212/-143 (2002)

Tetra Pak ALCIP 100 CIP Station Automatic CIP with Alfa Laval 5.5kw centrifugal Pump, Tetra Spiraflow tube & shell heat exchanger, balance tank and valves. S/No. T5845650212/-142 (2002)

Tetra Pak ALCIP 100 CIP Station CIP Station Automatic CIP with Alfa Laval 5.5kw centrifugal Pump, Tetra Spiraflow tube & shell heat exchanger, balance tank and valves, control panel

Prominox CUVE CIP Tank CIP Tank 2828 Ltr insulated CIP tank, shell working temp 65 degrees Celsius, 4 inch outlets, sample port, lifting eyes, manway hatch. S/No. 30954 (2002)

Prominox CUVE CIP Tank CIP Tank 4070 Ltr single skin CIP tank, 4 inch outlets, sample port, lifting eyes, manway hatch. S/No. 30963 (2002)

Zalkin 10-Head Capper Dual Feed with Allen Bradley Control

Prominox CUVE CIP Tank 6358 Ltr single skin CIP tank, 4 inch outlets, sample port, lifting eyes, manway hatch, tank DIA 205cm H325cm. S/No. 30962 (2002)

Alfa Laval 15/138 Centrifugal Pump 5.5kw, Stainless Steel cover

Alfa Laval 15/138 Centrifugal Pump 5.5kw, Stainless Steel cover. S/No. 47533

Filter Housing 55 Ltr, -1/10 Bar, -10/140 degrees Celsius Model SASE063G46JFB

Pall Filter Housing 56 Ltr, -1/10 Bar, -10/140 degrees Celsius Model SASE063G46JFB

APV GAULIN 55-3,OP Homogeniser Capacity 8,000 ltr p/h, weight 2600kg, motor 55kw, Max operating pressure 200 bar. S/No. 99L35436

Mixing Tank 150 Ltr 316 Stainless Steel mixing tank on legs with Lightnin HQL .25kw agitator, 2 inch bottom outlet, load cell capable

Mixing Tank 600 Ltr 316 Stainless Steel mixing tank with Lightnin ECL-M6L-37 Yr 2015 agitator, 2 inch bottom outlet, lifting eyes

Mixing Tank 5000 Ltr 316 Stainless Steel single skin mixing vessel on legs, with Lightnin LS150 1,5kw agitator, lifting eyes, top manway, 2 inch bottom outlet, sample port

Mixing Tank 5,000 Ltr 316 Stainless Steel single skin mixing vessel on legs, with Lightnin LS150 1,5kw agitator, lifting eyes, top manway, 2 inch bottom outlet, sample port

KRONES Top Module Labeller with Krones Panel Control. S/No. 407-106 (2006)

Alfa Laval Centrifugal Pump CIP 3 inch inlet, Stainless Steel with cover

Alfa Laval Centrifugal Pump CIP 2 inch inlet, Stainless Steel with cover

ABB Centrifugal Pump CIP 7.5kw, stainless Steel Pump, 3 inch inlet