2726 - Phase 1 - Large Capacity Boring Mills, Horizontal and Vertical Turning Lathes, Toolroom and Fabrication Equipment surplus to the ongoing requirements of Howden CKD Compressors s.r.o.
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
NEW LOT ADDED TO THIS AUCTION
Location: These lots are located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 21.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Czech Republic export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 152
Lot *: Combination of Lots 4 & 4A
Combination of Lots 4 & 4A
4 Tos Hulin SK1Q 16CNCB Vertical Turret Lathe, Chuck size 1.6m. S/No. 2212047 (1981)
Please Note: This Item is a late release item - March 2019
and
4A Cupboard with Tooling
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
4 | Tos Hulin SK1Q 16CNCB Vertical Turret Lathe |
4A | Cupboard with Tooling |
Lot 5: Tos Hulin SKQ12 NC Vertical Turret Lathe
Tos Hulin SKQ12 NC Vertical Turret Lathe, Chuck Size: 1250mm. S/No. 2212042
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 5A: Cupboard with Tooling
Cupboard with Tooling
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 5 & 5A
5 Tos Hulin SKQ12 NC Vertical Turret Lathe, Chuck Size: 1250mm. S/No. 2212042
and
5A Cupboard with Tooling
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
5 | Tos Hulin SKQ12 NC Vertical Turret Lathe |
5A | Cupboard with Tooling |
Lot 6: CKD Blansko 50E Twin Column Ram Type Vertical Turning Lathe
CKD Blansko SK50E Twin Column Ram Type Vertical Turning Lathe, Table Diameter 4770mm, Max Turning Diameter 6300mm, Max Turning Height 4220mm with Side Head & Segmented Grinding Head and Copying, Machine Weight 136,000kgs. S/No. 50101-27 (1974)
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 7: CKD Blansko Type 4000 Twin Column Ram Type Vertical Turning Lathe
CKD Blansko Type SK40 Twin Column Ram Type Vertical Turning Lathe with Side Head & Segmented Grinding Head, Copying, Chuck dia 3770mm, Max Turning Diameter 4000mm, Max Turning Height 2500mm, Machine Weight 108,000kgs. S/No. 40034-9 (1959)
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 8: Chuck Jaws with Riser Plates for CKD Blansko VTL
Chuck Jaws with Riser Plates for CKD Blansko VTL
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 8A: Chuck Jaws with Riser Plates for CKD Blansko VTL
Chuck Jaws with Riser Plates for CKD Blansko VTL
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot 8B: Chuck Jaws with Riser Plates for CKD Blansko VTL
Chuck Jaws with Riser Plates for CKD Blansko VTL
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 8 - 8B
Combination of Lots 8 - 8B
(3) Lots of Chuck Jaws with Riser Plates for CKD Blansko VTL
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
8 | Chuck Jaws with Riser Plates for CKD Blansko VTL |
8A | Chuck Jaws with Riser Plates for CKD Blansko VTL |
8B | Chuck Jaws with Riser Plates for CKD Blansko VTL |