2726 - Phase 1 - Large Capacity Boring Mills, Horizontal and Vertical Turning Lathes, Toolroom and Fabrication Equipment surplus to the ongoing requirements of Howden CKD Compressors s.r.o.
En collaboration avec
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
NEW LOT ADDED TO THIS AUCTION
Location: These lots are located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 21.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Czech Republic export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 152
Lot 1: Johnford VMC-2000SHD Omnitechique Super Vertical Machining Centre
Johnford VMC-2000SHD Omnitechique Super Vertical Machining Centre with Fanuc 21i-MB, 40 Station ATC, Table size 2.2m x 1m, Subtable 980mm x 980mm. S/No. VDB8053 (2008)
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 1A: Golden Sun Industrial Co Model CMC-631RV 4th Axis Unit
Golden Sun Industrial Co Model CMC-631RV 4th Axis Unit, Chuck size 630mm. S/No. 0863076 (06/2008)
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 1 & 1A
Combination of lots 1 & 1A
1 Johnsford VMC-2000SHD Omnitechique Super Vertical Machining Centre with Fanuc 21i-MB, 40 Station ATC, Table size 2.2m x 1m, Subtable 980mm x 980mm. S/No. VDB8053 (2008)
and
1A Golden Sun Industrial Co Model CMC-631RV 4th Axis Unit, Chuck size 630mm. S/No. 0863076 (06/2008)
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 1 | Johnford VMC-2000SHD Omnitechique Super Vertical Machining Centre |
| 1A | Golden Sun Industrial Co Model CMC-631RV 4th Axis Unit |
Lot 1B: Johnford Omnitechinque SL-80A 2-Axis CNC Lathe
Johnford Omnitechinque SL-80A 2-Axis CNC Lathe with Fanuc 21i-TB Control, Tailstock, 380mm 3 Jaw Chuck, 8 Station ATC. S/No. TEJ10016 (2010)
NEW LOT ADDED TO THIS AUCTION
Please Note: This Item is a late release item - March 2019
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 2: Tos Kurim FSQ 80 CNC Bedmill
Tos Kurim FSQ 80 CNC Bedmill with Mefi 872 Windows XP CNC Control, Table size 3m x 800mm, Tooling Cupboard. S/No. 14050 (1998)
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 3: Tos Hulin SKQ 20NC Vertical Turret Lathe
Tos Hulin SKQ 20NC Vertical Turret Lathe with KNS421 Control, Chuck size 2m. S/No. 2212019
Further Technical Information to be added soon
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 3A: Cupboard with Tooling
Cupboard with Tooling
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of lots 3 & 3A
Combination of lots 3 & 3A
3 Tos Hulin SKQ 20NC Vertical Turret Lathe with KNS421 Control, Chuck size 2m. S/No. 2212019
Further Technical Information to be added soon
and
3A Cupboard with Tooling
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici| N° de lot | Description |
|---|---|
| 3 | Tos Hulin SKQ 20NC Vertical Turret Lathe |
| 3A | Cupboard with Tooling |
Lot 4: Tos Hulin SK1Q 16CNCB Vertical Turret Lathe
Tos Hulin SK1Q 16CNCB Vertical Turret Lathe, Chuck size 1.6m. S/No. 2212047 (1981)
Please Note: This Item is a late release item - March 2019
Offers considered prior to Auction
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 4A: Cupboard with Tooling
Cupboard with Tooling
Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.