2717 - CNC Machining Centres, Wire EDMs, Engineering Equipment previously used by Boxall & Edmiston in the Manufacture of Bespoke Shotguns
Engineering
La subasta finalizó el
Tiempo restante
Descripción de la subasta
Location: These Lots are located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prima del comprador
A los compradores Premium se les cobrará un 16.00%.
IVA
El IVA ascenderá a un 20.00%.
Vista de horas
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Tenga en cuenta: - Cualquier traducción mediante Google Translate no está garantizada como una traducción precisa y es solo para fines de guía. La descripción del lote en inglés es la descripción predominante y se le da el mejor conocimiento del subastador. Sin embargo, la precisión no está garantizada y el comprador debe verificarla antes de hacer una oferta.
Aviso a compradores
Fecha final de pago
Fecha final de expedición
Transportistas
Empresas de almacenamiento
Exportar / Importar desde el Reino Unido detalles
Lotes 11-20 de 61
Lote *: Combination of Lots 4 & 4A
Combination of Lots 4 & 4A
Sodick AQ327L Premium Wire EDM with Sodick LP 33W CNC Premium Control, A.W.F, 650mm x 850mm Tank Size, Taper Cutting (U & V Axis) X = 750mm Y = 500mm Z = 400mm, Linear Motors (XYU Axis), Linear Glass Scale (XYU Axis). S/No. 1190 (2007)
Please Note: Any 3R Tool Holders or Fixtures that may be shown are not included in this lot
and
3R Tooling System
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Lotes en esta combinación
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí| N° de lote | Descripción |
|---|---|
| 4 | Sodick AQ327L Premium Wire EDM |
| 4A | 3R Tooling System |
Lote 5: Sodick AQ35L Ram Type EDM
Sodick AQ35L Ram Type EDM with Sodick LQ1G Touch Screen Control, 4 Axis X = 355mm Y = 254mm Z = 254mm Movements, C Axis to Ram, 4 Station ATC, 400mm x 600mm Table Size, Fire Extinquisher. S/No. 2289 (2007)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lote 6: Hardinge CHNCI Flatbed CNC Lathe
Hardinge CHNCI Flatbed CNC Lathe with Fanuc OT Control, 8-Station Cross Slide Turret, Collet Nose, Part off Slide, Filtermist Unit, 5000rpm Spindle, Hardinge Inbuilt Barfeed Attachment. S/No. CN-4371-T
Please Note: Any cutting tools that may be shown are not included with this lot.
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí
Lote 6A: Hardinge Tooling Collets
Hardinge Tooling Collets
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí
Lote 6B: Hardinge Tooling Collets
Hardinge Tooling Collets
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí
Lote *: Combination of Lots 6, 6A & 6B
Combination of Lots 6, 6A & 6B
Hardinge CHNCI Flatbed CNC Lathe with Fanuc OT Control, 8-Station Horizontal Turret, Collet Nose, Part Off Slide, Filtermist Unit, 5000 RPM Spindle, Hardinge Inbuilt Barfeed Attachment. S/No. CN-4371-T
and
Hardinge Tooling Collets
and
Hardinge Tooling Collets
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Lotes en esta combinación
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí| N° de lote | Descripción |
|---|---|
| 6 | Hardinge CHNCI Flatbed CNC Lathe |
| 6A | Hardinge Tooling Collets |
| 6B | Hardinge Tooling Collets |
Lote 7: Datron CAT 3D-MXL High Speed Router
Datron CAT 3D-MXL High Speed Router, 1.1m x 3m Table Size, 10-Station Tool Hire, Rotary 4th Axis Unit, Broken Tool Reflection, Spindle Mounted Probe, 60,000rpm Spindle, 3D Servo System, Windows Based XP. S/No. 50840 (2003)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lote 8: XYZ Pro 3000 CNC Turret Milling Machine
XYZ Pro 3000 CNC Turret Milling Machine with Proto Trak AGE3 3 Axis Control, 300mm x 1450mm Table, Powered Draw Bar, 70 to 3600rpm Spindle Speed, PTG 4th Axis Unit. S/No. 9497 (2001)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí
Lote 8A: Qty of International Tooling
Qty of International Tooling
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí
Lote *: Combination of lots 8 & 8A
Combination of lots 8 & 8A
XYZ Pro 3000 CNC Turret Milling Machine with Proto Trak AGE3 3 Axis Control, 300mm x 1450mm Table, Powered Draw Bar, 70 to 3600rpm Spindle Speed, PTG 4th Axis Unit. S/No. 9497 (2001)
and
Qty of International Tooling
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Lotes en esta combinación
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquí| N° de lote | Descripción |
|---|---|
| 8 | XYZ Pro 3000 CNC Turret Milling Machine |
| 8A | Qty of International Tooling |