2674 - Large Selection of Extrusion Blow Moulding & Injection Stretch Blow Moulding Machinery & Ancillary Equipment previously used in the Manufacturing of Detergent & Soap Bottles by Pizzolotto Detersivi dal 1919 srl, Belluno, Italy
Miscellaneous
La subasta finalizó el
Tiempo restante
Descripción de la subasta
Please Note: These lots are located in Belluno, Italy.
Unfortunately, there are no loading facilities available
on-site. Dismantling and Loading will be at the cost of
the purchaser.
Please click here to view the products manufactured with this equipment
Please click here to view Loading Fees for lots in this auction
Prima del comprador
A los compradores Premium se les cobrará un 18.00%.
IVA
El IVA ascenderá a un 22.00%.
Vista de horas
Viewing is available by appointment only with the Auctioneer. Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Tenga en cuenta: - Cualquier traducción mediante Google Translate no está garantizada como una traducción precisa y es solo para fines de guía. La descripción del lote en inglés es la descripción predominante y se le da el mejor conocimiento del subastador. Sin embargo, la precisión no está garantizada y el comprador debe verificarla antes de hacer una oferta.
Aviso a compradores
Fecha final de pago
Fecha final de expedición
Transportistas
Empresas de almacenamiento
Exportar / Importar desde el Reino Unido detalles
Lotes 21-30 de 141
Lote 7: AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine
AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine. S/No. SDLL0231 (2003) with Control Panel, Injection Clamping Force 720.7KN, Blow Clamping Force 646.2KN, Mag-plastics Dehumidifying Dryer and Hopper Loader, 4 Cavities, used to Produce 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3600
Lote 8: AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine
AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine. S/No. 9350090 (1993) with Control Panel, Dehumidifying Dryer and Hopper Loader, 4 Cavities, used to Produce 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3600
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquíLote 8A: Moulds for AOKI Machine
Moulds for AOKI Machine
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €30
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquíLote *: Combination of lots 8 & 8A
Combination of lots 8 & 8A
AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine. S/No. 9350090 (1993) with Control Panel, Dehumidifying Dryer and Hopper Loader, 4 Cavities, used to Produce 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
and
Moulds for AOKI Machine
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3630
Lotes en esta combinación
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquíN° de lote | Descripción |
---|---|
8 | AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine |
8A | Moulds for AOKI Machine |
Lote 9: TECHNE SYSTEM 4000 TWIN Extrusion Blow Moulding Machine
TECHNE SYSTEM 4000 TWIN Extrusion Blow Moulding Machine. S/No. 90112 (1999) with Microset MT1A Control Panel, 80/25 Extruder, 4 Heads, Clamping Force 135KN, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 4 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €2450
Lote 10: TECHNE SYSTEM 15000 SN Extrusion Blow Moulding Machine
TECHNE SYSTEM 15000 SN Extrusion Blow Moulding Machine. S/No. 90461 (2008) with Barber-Colman/Eurotherm Control Panel, 90/25 Extruder, 4 Heads, Clamping Force 220KN, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 3 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3100
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquíLote 10A: Moulds for TECHNE SYSTEM 15000SN (4) Pallets
Moulds for TECHNE SYSTEM 15000SN (4) Pallets
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €40
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquíLote *: Combination of lots 10 & 10A
Combination of lots 10 & 10A
TECHNE SYSTEM 15000 SN Extrusion Blow Moulding Machine. S/No. 90461 (2008) with Barber-Colman/Eurotherm Control Panel, 90/25 Extruder, 4 Heads, Clamping Force 220KN, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 3 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
and
Moulds for TECHNE SYSTEM 15000SN (4) Pallets
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3140
Lotes en esta combinación
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquíN° de lote | Descripción |
---|---|
10 | TECHNE SYSTEM 15000 SN Extrusion Blow Moulding Machine |
10A | Moulds for TECHNE SYSTEM 15000SN (4) Pallets |
Lote 11: TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine
TECHNE SYSTEM 15000 S Extrusion Blow Moulding Machine. S/No. 90063 (1998) with Barber-Colman Control Panel, 90/25 Extruder, 4 Heads, Clamping Force 220KN, Bottle Stripe Facility with Dedicated Control, Piovan Hopper Loader and Dosing Unit, Bonfiglioli Engineering Leak Detector, used to Produce 1.5, 2 & 2.5 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3100
Este lote también se ofrece como lote combinado
El mecanismo de "lotes combinados" ofrece a nuestros clientes una forma sencilla de realizar una oferta en una serie de artículos relacionados, si desea comprender mejor haga clic aquíLote 11A: Moulds for TECHNE SYSTEM 15000S (1) Pallet
Moulds for TECHNE SYSTEM 15000S (1) Pallet
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €20