2827A - High Quality CNC & Conventional Machinery on Behalf of a Retained Client at Halco Brighouse Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Please click here to view a Brochure for this Auction
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer.
Viewing days will be available Monday 11th and Tuesday 12th November 2019. Booking by appointment only.
Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-8 de 8
Lot 3: Mazak Slanturn 50NR CNC Lathe
Mazak Slanturn 50NR CNC Lathe with Mazatrol 640T CNC Control, Swing Over Bed 805mm, Swing Over Saddle 560mm, Distance Between Centres 2000mm, Spindle Speeds 1 – 1600rpm, Spindle Bore 104mm, X Axis Traverse 574mm, Z Axis Traverse 2000mm, Rapids ,X Axis 12m/min, Z 16m/min, with 10 Position Turret, 2 Point Hydraulic Steady, Programmable Tailstock, 385mm 3 Jaw Hydraulic Chuck, Swarf Conveyor, Approximate Dimensions 5815 x 2665 x 2725mm, Approximate Weight 14,000kg. S/No. 193247 (2007)
Please Note: This lot is located in West Yorkshire.
Unfortunately, there are no loading facilities on-site, dismantling
and loading will be at the cost of the purchaser. All/Any tooling
is being offered as specifically described.
Lot 4: DMG CTX 510 Ecoline 3 Axis CNC Lathe
DMG CTX 510 Ecoline 3 Axis CNC Lathe with Siemens 810D and Shop Turn CNC Control, Swing Over Bed 680mm, Swing Over Saddle 465mm, Maximum Turned Length 1050mm, Spindle Speeds 32 – 3250rpm, Driven Tooling Speeds 4000rpm, Rapids 30m/min, with C Axis, Driven Tooling, 12 Position Turret, 315mm 3 Jaw Hydraulic Chuck, Programmable Tailstock, Tool Probing, Swarf Conveyor, Approximate Dimensions 5250 x 2300 x 2000mm, Approximate Weight 8100kg. S/No. 8045000336E (2011)
Please Note: This lot is located in West Yorkshire.
Unfortunately, there are no loading facilities on-site, dismantling
and loading will be at the cost of the purchaser. All/Any tooling
is being offered as specifically described.
Lot 5: Haco FAT TUR 930MN CNC Lathe
Haco FAT TUR 930MN CNC Lathe with Siemens Shop Turn CNC Control, Swing Over Bed 950mm, Swing Over Saddle 630mm, Maximum Distance Between Centres 4000mm, Spindle Speeds 4 1200rpm, Spindle Bore 320mm, Rapids 6m/min, Compete with 2 No 3 Point Fixed Steadies, Boring Bar Steady, 8 Position Duplomatic Turret, Powered Tailstock, Deep Hole Boring Bar, Swarf Conveyor, Main Motor 33kw, Approximate Dimensions 6400 x 2890 x 2170mm, Approximate Weight 10,200kg. S/No. 120452 (2012)
Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 6: Doosan 670L 2 Axis CNC Lathe
Doosan 670L 2 Axis CNC Lathe with Fanuc 18i-TB CNC Control, Swing Over Bed 910mm, Swing Over Saddle 670mm, Maximum Distance Between Centres 1850mm, Maximum Turned Length 1800mm, Spindle Speeds 15 – 1500rpm, Spindle Bore 152mm, Feeds 0.001 – 500mm/rev, Rapids 16m/min, Complete With 12 Position Turret, Tool Probing, 2 Point Hydraulic Steady, Swarf Conveyor, Approximate Dimensions 5150 x 2355 x 2150mm, Approximate Weight 14,000kg. S/No. LNL-1056 (2005)
Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 7: Daewoo Puma 400B 2 Axis CNC Lathe
Daewoo Puma 400B 2 Axis CNC Lathe with Fanuc 21i-TB CNC Control, Swing Over Bed 700mm, Swing Over Saddle 480mm, Max Turned Diameter 550mm, Max Turned Length 1050mm, X Axis Traverse 362mm, Z Axis Traverse 1105mm, Distance Between Centres 1100mm, Spindle Speeds 20 – 2000rpm, Spindle Bore 132mm, Swarf Conveyor, 380mm 3 Jaw Hydraulic Chuck, 10 Position Turret, Tool Probing, Approximate Dimensions 5700 x 2200 x 2050mm, Approximate Weight 8200kg. S/No. PM352725 (2007)
Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 8: Daewoo Puma 400B 2 Axis CNC Lathe
Daewoo Puma 400B 2 Axis CNC Lathe with Fanuc 18i-T CNC Control, Swing Over Bed 700mm, Swing Over Saddle 480mm, Max Turned Diameter 550mm, Max Turned Length 1050mm, X Axis Traverse 362mm, Z Axis Traverse 1105mm, Distance Between Centres 1100mm, Spindle Speeds 20 – 2000rpm, Spindle Bore 132mm, with 2 Point Hydraulic Steady, Swarf Conveyor, 380mm 3 Jaw Hydraulic Chuck, 10 Position Turret, Tool Probing, Approximate Dimensions 5700 x 2200 x 2050mm, Approximate Weight 8200kg. S/No. PM351215 (2002)
Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. ...
Lot 9: Daewoo Puma 300B 2 Axis CNC Lathe
Daewoo Puma 300B 2 Axis CNC Lathe with Fanuc 18i-TB CNC Control, Swing Over Bed 570mm, Swing Over Saddle 370mm, Spindle Speeds 35 – 3500rpm, Spindle Bore 90mm, X Axis Traverse 282mm, Z Axis Traverse 1330mm, Max Turned Diameter 400mm, Maximum Turned Length 1298mm, Rapids X Axis 20m/min, Z Axis 24m/min, with 10 Position Turret, 3 Jaw Hydraulic Chuck, Tool Probing, Parts Catcher, Swarf Conveyor, Approximate Dimensions 4900 x 2450 x 2058mm, Approximate Weight 8000kg. S/No. P30L1376 (2003)
Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.
Lot 10: Puma 12 CNC Lathe
Puma 12 CNC Lathe with Fanuc 15T CNC Control, Swing Over Bed 580mm, Swing Over Saddle 380mm, Distance Between Centres 1200mm, 300mm 3 Jaw Hydraulic Chuck, 10 Position Turret, Swarf Conveyor. S/No. 440233
Please Note: This lot is located in West Yorkshire. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.