2826 - New, Ex.Demo & Used CNC, Conventional and Toolroom Machinery surplus to the requirements due to the relocation of Gate Machinery International Ltd
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Watford, UK. Please see individual lots for loading charges and information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 101-110 de 191
Lot 106: Gate Profitdrill PD-1B Bench Drill
Gate Profitdrill PD-1B Bench Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 420mm, Spindle Base: 650mm, 1/2 HP Motor
This is an Ex Demonstration Machine - The recommended list price for this item is £700
Please Note: This Item is located in Watford, UK
Manual handling, preparation and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item.
Unfortunately there is no warranty with this machine.
Lot 107: Gate Profitdrill PD-1B Bench Drill
Gate Profitdrill PD-1B Bench Drill, Max. Drilling Capacity: 16mm dia, MT2 Spindle Taper, Spindle Travel: 80mm, Working Diameter: 360mm, Spindle Speeds: 190 - 2,600rpm, 80mm dia of Column, Table Size: 300 x 300mm, Spindle Table: 420mm, Spindle Base: 650mm, 1/2 HP Motor
This is an Ex Demonstration Machine - The recommended list price for this item is £700
Please Note: This Item is located in Watford, UK
Manual handling, preparation and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item.
Unfortunately there is no warranty with this machine.
Lot 108: Gate G-330E High Speed Precision Centre Lathe
Gate G-330E High Speed Precision Centre Lathe with D.R.O, 330mm Swing over Bed, 195mm Swing over Cross slide, 1000mm between Centres, 190mm Bed Width, 490mm Swing over Gap, Spindle Speeds: 80 - 2,000rpm, 40mm Spindle Bore, MT5 Spindle Taper, MT3 Tailstock Taper, Tailstock Quill Travel: 110mm, Cross Slide Travel: 175mm, Compound Rest Travel: 100mm. S/No. 9611425 (11/2007)
This is a Used Machine
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet
Unfortunately there is no warranty with this machine. ...
Lot 109: Gate G-330E High Speed Precision Centre Lathe
Gate G-330E High Speed Precision Centre Lathe with D.R.O, 330mm Swing over Bed, 195mm Swing over Cross slide, 1000mm between Centres, 190mm Bed Width, 490mm Swing over Gap, Spindle Speeds: 80 - 2,000rpm, 40mm Spindle Bore, MT5 Spindle Taper, MT3 Tailstock Taper, Tailstock Quill Travel: 110mm, Cross Slide Travel: 175mm, Compound Rest Travel: 100mm. S/No. 9611433 (11/2007)
This is a Used Machine
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet
Unfortunately there is no warranty with this machine. ...
Lot 110: Gate G-330E High Speed Precision Centre Lathe
Gate G-330E High Speed Precision Centre Lathe with D.R.O, 330mm Swing over Bed, 195mm Swing over Cross slide, 1000mm between Centres, 190mm Bed Width, 490mm Swing over Gap, Spindle Speeds: 80 - 2,000rpm, 40mm Spindle Bore, MT5 Spindle Taper, MT3 Tailstock Taper, Tailstock Quill Travel: 110mm, Cross Slide Travel: 175mm, Compound Rest Travel: 100mm.
This is a Used Machine
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet
Unfortunately there is no warranty with this machine.
Lot 111: Gate G-330E High Speed Precision Centre Lathe
Gate G-330E High Speed Precision Centre Lathe with D.R.O, 330mm Swing over Bed, 195mm Swing over Cross slide, 1000mm between Centres, 190mm Bed Width, 490mm Swing over Gap, Spindle Speeds: 80 - 2,000rpm, 40mm Spindle Bore, MT5 Spindle Taper, MT3 Tailstock Taper, Tailstock Quill Travel: 110mm, Cross Slide Travel: 175mm, Compound Rest Travel: 100mm.
This is a Used Machine
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet
Unfortunately there is no warranty with this machine.
Lot 112: TFY Turret Mill
TFY Turret Mill with D.R.O
This is a Used Machine
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £50 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet
Unfortunately there is no warranty with this machine.
Lot 113: Creusen DS9250 Grinder
Creusen DS9250 Grinder with Stand & Water Cup
This is a Used Machine
Please Note: This Item is located in Watford, UK
A dismantling and loading onto suitable vehicle charge of £30 will be automatically added to your invoice should you be successful in purchasing this item. This Item would be loaded overhead onto flat vehicle - no base / pallet
Unfortunately there is no warranty with this machine.
Lot 114: Epple MFS-150 Multi Functional Grinder
Epple MFS-150 Multi Functional Grinder, Blade Size: 2950rpm, 230V Motor
This is an Ex Demonstration Machine - The recommended list price for this item is £80
Please Note: This Item is located in Watford, UK
Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.
Unfortunately there is no warranty with this machine.
Lot 115: Epple DS-150 Double Ended Grinder
Epple DS-150 Double Ended Grinder, Grinding Disk Dimensions: 150 x 20 x 16mm, Speed: 2850min, 230V
This is an Ex Demonstration Machine - The recommended list price for this item is £55
Please Note: This Item is located in Watford, UK
Should you be successful in purchasing this item, there will be no charge for the Manual handling, preparation and loading onto a suitable vehicle.