2814 - Doosan Puma, Daewoo, Leadwell Lathes and Machining Centres, Mills, Drills and Grinders no longer required by Omal Srl Italy
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Banzi PZ, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com or our Italian Office on: + 39 0732 677063 info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-9 de 9
Lot 100: Doosan Puma 500 CNC Lathe
Doosan Puma 500 CNC Lathe with Fanuc Series 21i – TB Control, 630mm 4 Jaw Chuck, 12 Station Turret, Tailstock, Hydraulic Steady, Swarf Conveyor, Tooling, Qty of Jaws. S/No. PM450518 (05/2008)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 100 & 100A
Combination of Lots 100 & 100A
100 - Doosan Puma 500 CNC Lathe with Fanuc Series 21i – TB Control, 630mm 4 Jaw Chuck, 12 Station Turret, Tailstock, Hydraulic Steady, Swarf Conveyor, Tooling, Qty of Jaws. S/No. PM450518 (05/2008)
and
7 Drawer Cabinet with Qty of Carbide Tips, Boring Bars and Sleeves Suitable for Doosan Puma
Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
100 | Doosan Puma 500 CNC Lathe |
100A | 7 Drawer Cabinet |
Lot 101: Puma 500 CNC Lathe
Puma 500 CNC Lathe with Fanuc Series 18i – T Control, 450mm 3 Jaw Chuck, Hydraulic Steady, 12 Station Turret, Tailstock, Swarf Conveyor, Tooleye, Tooling. S/No. PM450329 (03/2001)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of lots 101 & 101A
Combination of Lots 101 & 101A
101 - Puma 500 CNC Lathe with Fanuc Series 18i – T Control, 450mm 3 Jaw Chuck, Hydraulic Steady, 12 Station Turret, Tailstock, Swarf Conveyor, Tooleye, Tooling. S/No. PM450329 (03/2001)
and
101A - 2 Door Cabinet with Boring Bars, Carbide Tip Holders, Cutters, Centre Drills and Sleeves suitable for Puma 500 CNC Lathe
Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
101 | Puma 500 CNC Lathe |
101A | 2 Door Cabinet with Boring Bars |
Lot 102: Puma 450 CNC Lathe
Puma 450 CNC Lathe with Fanuc Series 18 – T Control, 450mm 3 Jaw Chuck, 12 Station Turret with Tooling, Tailstock, Hydraulic Steady, Swarf Conveyor, Tooleye, Tooling. S/No. PM450282 (11/1999)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 102 & 102A
Combination of Lots 102 & 102A
102 - Puma 450 CNC Lathe with Fanuc Series 18 – T Control, 450mm 3 Jaw Chuck, 12 Station Turret with Tooling, Tailstock, Hydraulic Steady, Swarf Conveyor, Tooleye, Tooling. S/No. PM450282 (11/1999)
102A - 8 Drawer Cabinet with Carbide Tips, Sleeves for Doosan, Taps, Cutters, Jaws
Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
102 | Puma 450 CNC Lathe |
102A | 8 Drawer Cabinet |
Lot 103: Daewoo Puma 12L-B CNC Lathe
Daewoo Puma 12L-B CNC Lathe with Fanuc Series O-T Control, 300mm 3 Jaw Chuck, 10 Station Turret, Tailstock, Swarf Conveyor, Tooleye, Tooling. S/No. PL121180 (04/1997)
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciLot *: Combination of Lots 103 & 103A
Combination of Lots 103 & 103A
103 Daewoo Puma 12L-B CNC Lathe with Fanuc Series O-T Control, 300mm 3 Jaw Chuck, 10 Station Turret, Tailstock, Swarf Conveyor, Tooleye, Tooling. S/No. PL121180 (04/1997)
103A 7 Drawer Cabinet with Carbide Tips, Sleeves Suitable for Doosan
Please Note: These lots are located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez iciN° de lot | Description |
---|---|
103 | Daewoo Puma 12L-B CNC Lathe |
103A | 7 Drawer Cabinet |
Lot 111: Tur 630m Lathe
Tur 630m Lathe, 380mm 3 Jaw Chuck, Distance between Centres 2m, Quick Change Tooling, (2) 3 Point Steadies. S/No. 48982
Please Note: This lot is located in Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.