2765 – Bridgeport, Kafo & Kryle Vertical Machining Centres, Colchester, Denford & KIA Lathes, Milling Machines, Grinders and Other Associated Toolroom Equipment
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Burntwood and Tamworth. Please see individual lots for loading information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 21-30 de 45
Lot 21: Colchester Chipmaster Lathe
Colchester Chipmaster Lathe, 11 1/4" x 20" Capacity, 3 Jaw Chuck, Catch Plate, Quick Change Tool Post Plus Holders, 5 Position Bed Stop, Taper Turning Attachment, Variable Spindle Speeds: 35 - 3000rpm. S/No. G2895.
Please Note: This Lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser
Lot 22: Colchester Chipmaster Lathe
Colchester Chipmaster Lathe, 3 Jaw Chuck, Chuck Guard, 4 Way Tool Post, Swing Over Cross Slide 7”, Spindle Bore 1⅜, Variable Spindle Speeds 35 – 3000rpm, 11 1/4” x 20” Capacity. S/No. FG7159
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser
Lot 23: Harrison M500 Lathe
Harrison M500 Lathe, 21" (530mm) x 60" (1500mm) Gap Bed Capacity, 3-Jaw Chuck, Chuck Guard, Newall Topaz 2 Axis Digital Read Out, Metric Dials, 28 3/4" (730mm) Swing In Gap, 3 1/8" (80mm) Spindle Bore, Speeds 31 – 1600. S/No. 500120369
Please Note: This Lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 24: Harrison M300 Centre Lathe
Harrison M300 Centre Lathe, 13" x 25" Capacity, 3 Jaw Chuck
Please Note: This Lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 25: Ajax AJ-200 x 1150 CNC Lathe
AJAX AJ-200 x 1150 CNC Lathe with Fagor 800T Control. S/No. 34818 B5 0624
Please Note: This lot is located in Burntwood. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. This Item however will be skated to the door ready for collection.
Lot 26: Jones & Shipman 1065 Universal Grinder
Jones & Shipman 1065 Universal Grinder, 14" x 60" Capacity, Plus internal Spindle, Coolant Tank. S/No. BO 92898
Please Note: This Lot is located in Burntwood. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. This Item however will be skated to the door ready for collection.
Lot 27: Jones & Shipman 1011P Grinder
Jones & Shipman 1011P Grinder, 27" x 12" Capacity with Fitted 24" x 10" Magnetic Chuck, Power Rise & Fall To Wheel Head, Coolant Tank. S/No. BO 79024
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 28: Voumard Internal Grinder
Voumard Internal Grinder
Please Note: This Lot is located in Burntwood. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. This Item however will be skated to the door ready for collection.
Lot 29: Cincinnati Model 315-16-Vt-Edo Vertical Miller
Cincinnati Model 315-16-Vt-Edo Vertical Miller, 68 1/2" x 16" Table, Anilam Digital Read Out, Power Feeds & Rapids All Directions, Power Feeds & Rapids To Vertical Head. S/No. 11A3V5UE-1
Please Note: This Lot is located in Burntwood. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. This Item however will be skated to the door ready for collection.
Lot 30: Startrite Vertical Bandsaw
Startrite Vertical Bandsaw, Model 316 Blade Welder, Variable Speed, 36" Throat, 14" Under Guides, 26" X 26" Table, 22" x 13" Support Table. S/No. 60096
Please Note: This Lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.