2765 – Bridgeport, Kafo & Kryle Vertical Machining Centres, Colchester, Denford & KIA Lathes, Milling Machines, Grinders and Other Associated Toolroom Equipment
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Please Note: These lots are located in Burntwood and Tamworth. Please see individual lots for loading information.
Prime d'acheteur
'La prime d''acheteur sera fixée à 16.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 20.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 1-10 de 45
Lot 1: Kafo MD 510 Vertical Machining Centre
Kafo MD 510 Vertical Machining Centre with Fanuc OM Control, Table Size 600 x 300mm, X Axis Travel 510mm, Y Axis Travel 360mm, Z Axis Travel 250mm, 12 Station ATC, Manuals, Tooling. S/No. 711022 (2001)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 2: Kafo MD 510 Vertical Machining Centre
Kafo MD 510 Vertical Machining Centre with Fanuc OM Control, Table Size 600 x 300mm, X Axis Travel 510 mm, Y Axis Travel 360mm, Z Axis Travel 250mm, 12 Station ATC, Manuals, Tooling. S/No. 71020 (2001)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 3: Kryle 500B Vertical Machining Centre
Kryle 500B Vertical Machining Centre with Fanuc OM Control, Table Size 37” x 20”, X Travel 23”, Y Travel 16”, Z Travel 16”, 16 Station ATC. S/No. K30769
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 4: Bridgeport 760/22 Vertical Machining Centre
Bridgeport 760/22 Vertical Machining Centre with Heidenhain 360 Control, Table Size 1000mm x 490mm, X Axis Travel 760mm, Y Axis 500mm, Z Axis 480mm, 22 Station ATC. S/No. 20291 (1994)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 5: Gate Model-610 Vertical Machining Centre
Gate Model-610 Vertical Machining Centre with Anilam 6000i Control, 8000rpm Spindle Speed, Main Table Area 760mm x 360mm, Traverses: X=610mm, Y=355mm, Z=510mm, ATC Capacity 16 Tools, Spindle Nose BT40.
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 6: Hyundai SPT-V30T Twin Pallet Drill Tap Centre
Hyundai SPT-V30T Twin Pallet Drill Tap Centre with Yasnac MX3 Control, Table Size 600 x 380mm x 2, X Axis Travel 500mm, Y Axis Travel 300mm, Z Axis Travel 300mm, Spindle Speeds 10 – 8000rpm, Spindle Taper ISO 30, Manuals and Tooling. S/No. 5114 (1997)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 7: Feeler FTC-30 CNC Lathe
Feeler FTC-30 CNC Lathe with LNS Bar Feed with Fanuc OT Control, Swing Over Bed 580mm, Max. Turning Length 620mm, Bar Capacity 76mm, X Axis Travel 225mm, Y Axis Travel 670mm, 12 Station Turret, Tailstock, Collet Chuck, Collets and Tooling, Manuals. S/No. TE082 (1999)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 8: KIA Turn 21 CNC Lathe
KIA Turn 21 CNC Lathe with Fanuc OT Control, Swing Over Bed 550mm, Max Turning Length 500mm, X Axis Travel 210mm, Z Axis Travel 430mm, 10 Station Turret, Tailstock, Tool Presetter, 200mm 3 Jaw Chuck, Swarf Conveyor. S/No. KT21529 (1997)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 9: KIA Turn 15 CNC Lathe
KIA Turn 15 CNC Lathe with Fanuc OT Control, Swing Over Bed 551mm, Max. Turning Length 500mm, X Axis Travel 160mm, Z Axis Travel 381mm, Spindle Bore 48mm, 10 Station Turret, Tailstock, Tool Presetter, 150mm 3 Jaw Chuck. S/No. KIA 15410 (1995)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Lot 10: Hitachi Seiki Hi Tec Turn 20SII CNC Lathe
Hitachi Seiki Hi Tec Turn 20SII CNC Lathe with Seicos Control, Max. Turning Dia. 210mm, Max. Turning Length 380mm, X Axis Travel 200mm, Z Axis Travel 400mm, C Axis, 16 Station Turret, Parts Catcher, Tool Eye, Swarf Conveyor. S/No. HTS22975
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.