2763 - CNC Bedmills, Lathes, General Workshop Equipment and Ancillaries no longer required by Torneria Meccanica Raimondi Pierangelo, Italy
Engineering
L'enchère s'est terminée le
Temps restant
'Description de l''enchère'
Location: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Prime d'acheteur
'La prime d''acheteur sera fixée à 18.00%.'
TVA
'La taxe sur la valeur ajoutée s''élèvera à 22.00%.'
Temps de consultation
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +39 0732 677 063 or email us at: info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.
Avis aux acheteurs
Date limite de paiement
'Date limite d''apurement'
'Agents d''expédition'
Sous-traitants pour le stockage
Exporter/Importer des détails du Royaume-Uni
Lots 11-20 de 129
Lot 6: Gualdoni Vertical Machining Centre
Gualdoni Vertical Machining Centre with Selca Control, 40-Station Tool Changer, Table Size 1300mm x 450mm. S/No. 549 C8G/01 (1993)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 7: Haas SL-40 CNC Lathe
Haas SL-40 CNC Lathe with Haas Control, Tailstock, Tooleye, 12-Station Turret, 3-Jaw Chuck 530mm, Live Tooling and Swarf Conveyor. S/No. 3082769 (2008)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 7A: Su-Matic AH42 Live Tooling
Su-Matic AH42 Live Tooling suitable for Haas Lathe
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 7B: (2) Live VDI 40 Tooling
(2) Live VDI 40 Tooling, (1) Straight and (1) Angled and (5) Pieces of VDI 40 Tooling
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 7C: (1) Live Angled VDI 40 Tool and (6) Pieces of VDI 40 Tooling
(1) Live Angled VDI 40 Tool and (6) Pieces of VDI 40 Tooling
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 7D: (1) Live Angled VDI 40 Tool and (6) Pieces of VDI 40 Tooling
(1) Live Angled VDI 40 Tool and (6) Pieces of VDI 40 Tooling
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Veuillez noter que ce lot est aussi proposé en offre combinée.
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot *: Combination of Lots 7, 7A, 7B, 7C and 7D
Combination of Lots 7, 7A, 7B, 7C and 7D
Haas SL-40 CNC Lathe with Haas Control, Tailstock, Tooleye, 12-Station Turret, 3-Jaw Chuck 530mm, Live Tooling and Swarf Conveyor. S/No. 3082769 (2008)
and
Su-Matic AH42 Live Tooling for suitable for Haas Lathe
and
(2) Live VDI 40 Tooling, (1) Straight and (1) Angled and (5) Pieces of VDI 40 Tooling
and
(1) Live Angled VDI 40 Tool and (6) Pieces of VDI 40 Tooling
and
(1) Live Angled VDI 40 Tool and (6) Pieces of VDI 40 Tooling
Please Note: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lots de cette offre combinée
Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici
Lot 8: Supermax YCM-TC-36W CNC Lathe
Supermax YCM-TC-36W CNC Lathe with Fanuc Series OT Control, 12-Station Turret, 3-Jaw Chuck, Tooling and Tailstock. S/No. 204033 (2002)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 9: Supermax YCM-TC-15 CNC Lathe
Supermax YCM-TC-15 CNC Lathe with Mitsubishi Control, 12-Station Turret, 3-Jaw Chuck 210mm, Tail Stock, Tooling, Fume Extractor, Swarf Conveyor. S/No. 703389 (1997)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lot 10: Parallel EST TICIMO 510 Lathe
Parallel EST TICIMO 510 Lathe, 3-Jaw Chuck, Distance between Centres 1400mm, Chuck Dia 800mm, 4-Jaw Chuck 1m, 3-Point Steady, Bore Size 130mm, Quick Change Tooling. S/No. 00834
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.