2716 - SNK Milling & Boring Machine, Machining & Turning Centres and Machine Tools no longer required by Kinetic Engineering Ltd
Engineering
Aukcja zakończyła się dnia
Pozostały czas
Opis aukcji
Location: These lots are located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Premia kupującego
Premia kupującego zostanie naliczona w wysokości 16.00%.
VAT
Stawka VAT wynosi 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Uwaga: tłumaczenie przy użyciu Google Translate nie jest gwarantowane jako pewne i może być użyte tylko w celach orientacyjnych. Opis produktu w języku angielskim jest nadrzędny i jest najdokładniejszym opisem posiadanym przez aukcjonera. Niemniej jednak, prawidłowość nie jest gwarantowana i powinna zostać zweryfikowana przez kupującego przed złożeniem oferty.
Informacja dla kupujących
Ostateczna data płatności
Ostateczna data odbioru przedmiotu
Firmy transportowe
Firmy magazynowe
Eksport/Import z Wielkiej Brytanii szczegóły
Przedmioty 21-30 z 35
Przedmiot *: Combination of lots 105, 105A, 105B
Combination of lots 105, 105A, 105B
Lot 105 - Cincinnati Milicron Arrow 500 Vertical Machining Centre with Heidenhain 410 Control, 21 atc, Table size 700mm x 520mm. S/No. 7042-HOA-RA-1682
and
Lot 105A - Cat 40 Tooling
and
Lot 105B - Cat 40 Tooling
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmioty w tej kombinacji
Mechanizm „Połączonych partii” daje naszym klientom prosty sposób na złożenie oferty na wiele powiązanych pozycji, jeśli chcesz lepiej zrozumieć kliknij tutaj| Partia # | Opis |
|---|---|
| 105 | Cincinnati Milacron Arrow 500 Vertical Machining Centre |
| 105A | Cat40 Tooling |
| 105B | Cat40 Tooling |
Przedmiot 106: Doosan S550L Lathe
Doosan S550L Lathe with Fanuc Series 21i-TB Control, 3 Jaw Chuck 380mm, 12 Station Turret, Tailstock, Tooleye, Swarf Conveyor. S/No. LNR-1055 (2005)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 107: Doosan S280 Lathe
Doosan S280 Lathe with Fanuc Series Oi-T Control, 3 Jaw Chuck 310mm, 10 Station Turret, Tailstock, Tooleye, Parts Catcher, Samsys Magazine Barfeed. S/No. LNG1141
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 108: Colchester Tornado 200 Lathe
Colchester Tornado 200 Lathe S/No. C20374/336 (1996) with GE Fanuc Series O-T Control, 3 Jaw Chuck 210mm, 12 Station Turret, Tailstock, Swarf Conveyor, Hydrafeed HY Barfeed with a selection of Liners. S/No. 9280
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 109: Okuma & Howa ACT 3 Lathe
Okuma & Howa ACT 3 Lathe with Fanuc Series O-T Control, 3 Jaw Chuck 210mm, Tooleye, Tailstock, 12 Station Turret. S/No. 09655
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 110: Okuma & Howa ACT 4 Lathe
Okuma & Howa ACT 4 Lathe with Fanuc Series 15-T Control, 3 Jaw Chuck 300mm, 12 Station Turret, Tooleye, Tailstock. S/No. 01641
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 111: Colchester Electronic Mastiff Lathe
Colchester Electronic Mastiff Lathe with GE Fanuc Series 20-T Control, 2200mm between Centres, Gap Bed 660mm Faceplate, 3 Jaw Chuck 380mm, 4 Jaw Chuck 400mm, 3 Pont Steady, Quick Change Tooling. S/No. EM0150 (1999)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 112: Colchester Mastiff 1400 Lathe
Colchester Mastiff 1400 Lathe, 3 Jaw Chuck 310mm, 1600mm between Centres, Gap Bed, Quick Change Tooling, Newhall Dro, 3 Point Steady. S/No. 8/0203/06486DD
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 113: Bridgeport Series 1 Milling Machine
Bridgeport Series 1 Milling Machine, Heidenhain Dro, Table size 1220mm x 230mm with Horizontal Head. S/No. 053120493
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Przedmiot 114: Moore Jig Grinder Model No. 2
Moore Jig Grinder Model No. 2, Table size 19” x 10”, Anilam 411 Wizard Dro. S/No. 7125
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.