SNK RB-2NM Bridge Type CNC Milling & Boring Machine with Fanuc Control Series 18m, Vertical and Horizontal Heads, BT50 Tooling, 40atc, Table size 2.5m x 1.2m, Travel lengths X = 4350mm Y = 2000mm Z = 600mm W = 900mm. S/No. 99K1738 (1999)

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT50 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT50 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT50 Tooling

Please Note: This lot is located in Worcester, unfortunately, there are no loading facilities available on-site. Dismantling and loading will be at the cost of the purchaser.

BT50 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 100, 100A, 100B, 100C, 100D

Lot 100 - SNK RB-2NM Bridge Machine with Fanuc Control Series 18m, Vertical and Horizontal Heads, BT50 Tooling, 40atc, Table size 2.5m x 1.2m, Travel lengths X = 4350mm Y = 2000mm Z = 600mm W = 900mm. S/No. 99K1738 (1999)

and

Lot 100A - BT50 Tooling

and

Lot 100B - BT50 Tooling

and

Lot 100C - BT50 Tooling

and

Lot 100D - BT50 Tooling

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Auerbach FBE 1500 Milling Machine with Heidenhain 407 Control, 4th Axis with 800mm Turntable, Table size 1.5m x 0.65m. S/No. 032 032 (1996)

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

72” Webster & Bennett CNC VTL Vertical Borer, Retro fitted CNC Fagor Control, 72” 4 Jaw Chuck . S/No. 602342 (1980)

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Cincinnati Arrow Series 2 1000 Machining Centre with Heidenhain TNC 410ma Control, 21atc, Through Spindle Coolant. S/No. 7049-H00-KH1067

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Cincinnati Milacron CNC 15 4th Axis Unit, 310mm Face Plate. S/No. 540

Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.