2619 - Copper Tube Manufacturing Equipment no longer required by KME Germany GmbH & Co KG

Engineering

L'enchère s'est terminée le

2018-01-17 15:00:00.0

Temps restant

Enchère terminée

'Description de l''enchère'

Location: These Items are located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

 

Please click here to view a brochure for this equipment

Prime d'acheteur

'La prime d''acheteur sera fixée à 16.00%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 19.00%.'

Temps de consultation

Viewing will be available by appointment only with the Auctioneer
Please contact our UK Office on: +44 (0) 121 328 2424 or email: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all German export conditions and the obtaining of any applicable Export Licences

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* Remarque : Toute traduction effectuée à l'aide de Google Traduction n'est pas garantie en tant que traduction exacte et n'est fournie qu'à titre indicatif. La description du lot en anglais est la description prédominante et bénéficie de la meilleure connaissance du commissaire-priseur. Cependant, l'exactitude n'est pas garantie et doit être vérifiée par l'acheteur avant d'enchérir.

Avis aux acheteurs

Date limite de paiement

2018-01-19 17:00:00.0

'Date limite d''apurement'

2018-02-01 17:00:00.0

'Agents d''expédition'

Sous-traitants pour le stockage

Exporter/Importer des détails du Royaume-Uni

Lots 41-50 de 71

Les enchères seront étendues sur des lots individuels si les enchères sont placées dans les 10 minutes suivant l'heure de fin de l'article.
Preview image
Fin:
20 mars 2018 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
19.00%

Lot 9A: Rotary Crane System with 5 Tube Transport Basket Lifting Devices, Controls and Electrical Cabinets

Rotary Crane System with 5 Tube Transport Basket Lifting Devices, Controls and Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

9*: Marshall Richard Pre-Draw Spinner Block MR 3

Preview image
Fin:
20 mars 2018 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
19.00%

Lot 9B: Friedr. Krollmann Counter Balanced Crimper/Pointing Machine HRA 4/65-4 KVH-h

Friedr. Krollmann Counter Balanced Crimper/Pointing Machine HRA 4/65-4 KVH-h with Pre-straightner, Jib Crane Hydraulics, Control and Electrical Cabinets. S/No. 2009-13269 (2009)

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

9*: Marshall Richard Pre-Draw Spinner Block MR 3

Preview image
Fin:
20 mars 2018 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
19.00%

Lot 9C: Marshall Richard Spinner Block with Basket Circulating System

Marshall Richard Spinner Block with Basket Circulating System, Infeed Roller Table, Siemens Controls, Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

9*: Marshall Richard Pre-Draw Spinner Block MR 3

Preview image
Fin:
20 mars 2018 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
19.00%

Lot 10*: Marshall Richard Pre-Draw Spinner Block MR 4

Marshall Richard Pre-Draw Spinner Block MR 4, Direction of Rotation - Right Clockwise, Block Dia 2134mm, Maximum Tube Inlet Dia 45mm, Maximum Wall Thickness 2.1mm, Minimum Tube Oulet Dia 6mm x 1mm Wall Thickness, Maximum Pulling Carriage Force 8.1 Ton, Pulling Speed 900 m/min (meters per min), Basket Circulation System with Basket Lifting Devices, (4) - Tube Transport Baskets, Dancers, Crimping/Machine Pointing, Pre-Straightner Control, Spinner Block, Discharge Table 1500kg Capacity, Electrical Control, Lubrication System (1986) (Modifications 1990)

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. ...

Lots de cette offre combinée

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

N° de lot Description
Preview image
Fin:
20 mars 2018 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
19.00%

Lot 10A: Rotary Crane with two Basket Lifting Device

Rotary Crane System with 2 Tube Transport Basket Lifting Devices, Controls and Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

10*: Marshall Richard Pre-Draw Spinner Block MR 4

Preview image
Fin:
20 mars 2018 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
19.00%

Lot 10B: AMAG Counter Balanced Crimping/Pointing Machine

AMAG Counter Balanced Crimper/Pointing Machine with Pre-straightner, Jib Crane, Hydraulics, Control and Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

10*: Marshall Richard Pre-Draw Spinner Block MR 4

Preview image
Fin:
20 mars 2018 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
19.00%

Lot 10C: Marshall Richard Spinner Block

Marshall Richard Spinner Block Serial/No. M853311/13P with Basket Circulating System, Infeed Roller Table, Siemens Controls, Electrical Cabinets

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

10*: Marshall Richard Pre-Draw Spinner Block MR 4

Preview image
Fin:
20 mars 2018 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
19.00%

Lot 10D: (3) x Schlak 3 Metre Powered Infeed Roller Tables

(3) x Schlak 3 Metre Powered Infeed Roller Tables with Two Pneumatic Coil Lamps

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

10*: Marshall Richard Pre-Draw Spinner Block MR 4

Preview image
Fin:
20 mars 2018 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
19.00%

Lot 10E: (3) Powered Roller Conveyor Systems

(3) Powered Roller Conveyor Systems

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

10*: Marshall Richard Pre-Draw Spinner Block MR 4

Preview image
Fin:
20 mars 2018 15:00:00 GMT
Temps restant:
Enchère terminée
'Prime d''acheteur:'
16.00%
Taux de TVA:
19.00%

Lot 10F: Spares for Spinner Blocks

Spares for Spinner Blocks

Please Note: This Item is located in Germany. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser. 

Please click here to view a specification sheet for this equipment

Veuillez noter que ce lot est aussi proposé en offre combinée.

Le mécanisme des "lots combinés" offre à nos clients un moyen simple de placer une offre sur un certain nombre d'articles connexes, si vous souhaitez mieux comprendre Cliquez ici

10*: Marshall Richard Pre-Draw Spinner Block MR 4

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Catégories