Los 1: Hurco VMX60i Vertical Machining Centre
Endet:
Dienstag 2 Jun 2015 15:50 PM BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung: £ 500
Gebote: 41
Aufgeld: 16%
MwSt-Satz: 20%
| Make: | Hurco |
|---|
Vollständige Losbeschreibung
Hurco VMX60i Vertical Machining Centre S/No. H-H6145 (2014) with Full 4th Axis, Table Size 1676mm x 660mm, 1360kg Capacity. X Axis = 1524mm, Y Axis = 660mm, Z Axis 610mm, 250mm 3-Jaw Chuck and Face Plate, Tailstock, 24-Position ATC, 12,000 RPM Spindle, CAT40 Taper, Coolant Filtration System, Swarf Conveyor and Through Spindle Coolant, Habor HWK 250 PTSB Oil Chiller. S/No. 233387, Dual Screen Control, 3D Taster DTI Probe, (2) Hurco HVS66 150mm Machine Vices, Range of Tooling
Please Note:
The cost of this machine in November 2014 was £93,900 + VAT
This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser.
Wichtige Begriffe / Exportinformationen
Location: These Items are located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.