Los 21: Heidimagdeburg M300 5 Axis Lathe
Endet:
Dienstag 27 Sep 2016 17:10 PM BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung: £ 100
Gebote: 97
Aufgeld: 16%
MwSt-Satz: 20%
Video
Vollständige Losbeschreibung
Heidimagdeburg M300 5 Axis Lathe with Siemens 840CT Control System, axis travels X 1 = 230mm Z 1 = 1600mm X 2 = 130 Z2 = 1400, Schunk 3 Jaw Quick Change Chuck, 12 Station Upper Turret with Drives Tool Facility, 12 Station Low Turret with SMW 3 Point Steady, 8 – 101mm Capacity, programmable Tail Stock, 1500mm between centres, Swarf Conveyor, Coolant Clarifier, S/No. H150C237005 (1998)
Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.
Wichtige Begriffe / Exportinformationen
Please Note: All lots are located in Huddersfield, West
Yorkshire.
Unfortunately there are no loading facilities available on
site. Dismantling & Loading will be at the cost of the
purchaser.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.