Los 12: SW Emag Type BA400 Twin Spindle 4-Axis Horizontal Machining Centre
Endet:
Dienstag 27 Sep 2016 16:40 PM BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung: £ 250
Gebote: 153
Aufgeld: 16%
MwSt-Satz: 20%
| Make: | SW Emag |
|---|
Vollständige Losbeschreibung
SW Emag Type BA400 Twin Spindle 4-Axis Horizontal Machining Centre with Fanuc 16i MB Control System, Maximum Spindle speed 10,000 rpm, Spindle Taper HSK 63, distance between spindles 400mm, axis travels X 400mm Y 450mm Z 400mm, 4th axis 180 degrees, 60 Station ATC 30 per spindle Maximum tool weight 10kg, Rapid Feed rates 30m/min, Fitted with Blum Laser Probing Swarf Conveyor, Knoll Coolant Filtration System, S/No. 1640502 (2007) (Please Note: There is No Probe)
Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser
Wichtige Begriffe / Exportinformationen
Please Note: All lots are located in Huddersfield, West
Yorkshire.
Unfortunately there are no loading facilities available on
site. Dismantling & Loading will be at the cost of the
purchaser.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.