Los 5: Doosan Type DNM 400ii 4-Axis Vertical Machining Centre
Endet:
Dienstag 27 Sep 2016 15:20 PM BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung: £ 250
Gebote: 112
Aufgeld: 16%
MwSt-Satz: 20%
| Make: | Doosan |
|---|
Video
Vollständige Losbeschreibung
Doosan Type DNM 400ii 4-Axis Vertical Machining Centre with
Fanuc i series Control System, Maximum Spindle Speed 12,000 rpm
BT40, Spindle Taper, axis travels X 764mm Y 437mm Z 512mm 4th 360
degrees, Rapid Feed rates X Y 36 M/min Z 30 M/min, 30 Station ATC,
Swarf Conveyor, Fume Extraction, Nikken 4th axis 200mm diameter
with Tail Stock,
Renishaw Laser Tool Presetter, S/No. MV0009-002428
(01/2014)
Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.
Wichtige Begriffe / Exportinformationen
Please Note: All lots are located in Huddersfield, West
Yorkshire.
Unfortunately there are no loading facilities available on
site. Dismantling & Loading will be at the cost of the
purchaser.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.