Los 3: DMG Mori NTX2000/1500T CNC Mill/Turn Centre
Endet:
Donnerstag 6 Jun 2019 16:00 PM BST
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung: £ 500
Gebote: 126
Aufgeld: 16%
MwSt-Satz: 20%
| Make: | DMG Maho |
|---|
Video
Vollständige Losbeschreibung
DMG Mori NTX2000/1500T CNC Mill/Turn Centre with Fanuc F31iB5 Control, Max Workpiece Swing 660mm, Swing Over Cross Slide 660mm, Max Turning Length 1540mm, B Axis +/- 120 Deg, Mill/Turn Spindle 12,000rpm, Hydrajet WP10-1000-03 High Pressure Coolant, Kitagawa B212 Chuck, Travelling Hydraulic Steady, 2 x 40-Position ATC (Capto C6), Swarf Conveyor. S/No. NTX20140209 (2014)
Please Note: This lot is located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
Wichtige Begriffe / Exportinformationen
Please Note: These lots are located in Worcester. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.