Los 17: COLCHESTER MASTER 2500 Gap Bed Centre Lathe
Endet:
Donnerstag 26 Jan 2017 16:10 PM GMT
Verbleibende Zeit:
Auktion beendet
Schrittweise Erhöhung: £ 100
Gebote: 27
Aufgeld: 16%
MwSt-Satz: 20%
| Make: | Colchester |
|---|
Vollständige Losbeschreibung
COLCHESTER MASTER 2500 Gap Bed Centre Lathe, Swing Over Bed 13", Swing In Gap 18", Distance Between Centres 40", Spindle Bore 1 5/8", Spindle Speeds 30 to 2500rpm with 3 Jaw Chuck, Drive Plate, Taper Turning, 2 Point Steady, Quick Change Tool Post.
Please Note: All lots are located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Wichtige Begriffe / Exportinformationen
Please Note: Lot 13 is located in Gateshead, Newcastle upon Tyne, has been dismantled for loading and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Please Note: Lot 29 is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Please Note: Lot 31 is located in Accrington, unfortunately there are no loading facilities on-site. Blocking and Securing will be at the cost of the purchaser. This lot must be removed from site by 8th February 2017.
Please Note: All other lots are located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.