2823 - Hurco Vertical Machining Centres, Sodick & Agie EDM'S, Toolroom Equipment and Ancillaries no longer required due to Investment in New Equipment by The Goodfish Group, Cannock

Engineering

'L''enchère se termine le'

mercredi 16 oct. 2019 at 03:00PM (BST)
Ajouter au calendrier

Temps restant

Temps écoulé

'Description de l''enchère'

Location: These lots are located in Cannock.  Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lot 107A however is located in Birmingham.

Buyer's premium

'La prime d''acheteur sera fixée à 16%.'

TVA

'La taxe sur la valeur ajoutée s''élèvera à 20%.'

Temps de consultation

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Veuillez cocher la case ci-dessous et cliquer sur confirmer


* 'Remarque: l''exactitude de toute traduction effectuée à l''aide de Google Translate n''est pas garantie. Une telle traduction n''est fournie qu''à titre indicatif. La description du lot en anglais est celle qui prévaut et repose sur les meilleures connaissances du commissaire des ventes. Toutefois, son exactitude n''est pas garantie et doit être vérifiée par l''acheteur avant l''enchère.'

Avis aux acheteurs

Date limite de paiement

18 oct. 2019 at 17:00 (BST)

'Date limite d''apurement'

31 oct. 2019 at 17:00 (GMT)

'Agents d''expédition'

Sous-traitants pour le stockage

Lots 1-10 de 81

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Fin:
30 oct. 2019 15:00:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
4
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 100: Hurco VMX 30 Vertical Machining Centre

Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of Lots 100 & 100A

Preview image
Fin:
30 oct. 2019 15:00:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
2
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 100A: Qty of CAT40 Tool Holders

Qty of CAT40 Tool Holders and Collets and Bench

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of Lots 100 & 100A

Preview image
Fin:
30 oct. 2019 15:00:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
15
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot *: Combination of Lots 100 & 100A

Combination of Lots 100 & 100A

Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)

and

Qty of CAT40 Tool Holders, Collets and Bench

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lots de cette offre combinée

N° de lot Description
Preview image
Fin:
30 oct. 2019 15:00:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
9
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 101: Hurco VSX24 Vertical Machining Centre

Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of Lots 101 & 101A

Preview image
Fin:
30 oct. 2019 15:00:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£25
Enchères:
2
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 101A: Qty of CAT40 Tool Holders and Collets

Qty of CAT40 Tool Holders and Collets

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Veuillez noter que ce lot est aussi proposé en offre combinée.

*: Combination of Lots 101 & 101A

Preview image
Fin:
30 oct. 2019 15:00:00 GMT
Temps restant:
Enchère terminée
Augmentation:
£250
Enchères:
12
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot *: Combination of Lots 101 & 101A

Combination of Lots 101 & 101A

Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)

and

Qty of CAT40 Tool Holders and Collets

Please Note: These lots are located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Lots de cette offre combinée

N° de lot Description
Preview image
Fin:
16 oct. 2019 15:30:00 BST
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
30
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 102: Sodick AQ325L Wire Eroder

Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 1625

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
16 oct. 2019 15:30:00 BST
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
30
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 103: Sodick AQ325L Wire Eroder

Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 0167

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
16 oct. 2019 15:50:00 BST
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
20
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 104: Sodick AQ325L Wire Eroder

Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 0168

Please Note: For Spares and Repairs

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Preview image
Fin:
16 oct. 2019 16:00:00 BST
Temps restant:
Enchère terminée
Augmentation:
£500
Enchères:
24
'Prime d''acheteur:'
16%
Taux de TVA:
20%

Lot 105: Sodick AM3L Die Sink

Sodick AM3L Die Sink with Sodick LN1 Control, 4 Automatic Tool Changer, 3R Tooling, Table Size 600mm x 400mm. S/No. 0070 (2002)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Catégories